Shooting Three Images With The Exposure; Exposure Bracket; Before Operation - Sony Cyber-shot DSC-T3 Operating Instructions Manual

Before operation

When shooting still images, set
(Camera) in the menu to other than [Auto]
(pages 53 and 120).
Control button Mode switch
MENU
 Set the mode switch to
.
 Press MENU.
The menu appears.
 Select
(Metering Mode)
with /, then select the
desired metering mode with
/.
 When selecting [Spot] in step
, position the spot metering
cross hair on one point of the
subject you want to shoot.
60min FINE
VGA
P
SAF 250 F3.5
• When using spot metering, to focus on the
metering position, setting  (Focus) to
[Center AF] is recommended (page 57).
or
Shooting three
images with the
exposure shifted
101
98

— Exposure Bracket

Spot metering
The Exposure Bracket function records a
cross hair
series of three images with the exposure
values automatically shifted. This lets
you select the image with the appropriate
exposure after recording when you are
unable to shoot good pictures depending
on the brightness of the subject.
Before operation
Set
[Auto] (pages 53 and 120).
Control button
(Camera) in the menu to other than
Mode switch
MENU
63