Sony Cyber-shot DSC-T3 Operating Instructions Manual page 126

(Setup 2)
2
Item
File Number
USB Connect
Video Out
Clock Set
126
Setting
Series
Reset
PictBridge
PTP
Normal
NTSC
PAL
OK / Cancel
Description
− Assigns numbers to files in sequence even if the "Memory Stick Duo" is changed or
the recording folder is changed.
− Resets the file numbering and starts from 0001 each time the folder is changed.
(When the recording folder contains a file, a number one higher than the largest
number is assigned.)
− Connects the camera with a PictBridge compatible printer (page 78).
− When a PTP connection is made, the Copy Wizard automatically starts up and
copies the images in the recording folder (page 95) set in the camera to the
computer. (This supports Windows XP and Mac OS X.)
− Makes a USB connection between the camera and a computer (pages 91 and 103).
− Sets the video output signal to NTSC mode (e.g., USA, Japan).
− Sets the video output signal to PAL mode (e.g., Europe).
Sets the date and time (pages 21 and 54).