Risk Reduction; Symbols On The Product - Ryobi RLT254CDSO Original Instructions Manual

■ injury caused by flying debris
– Wear eye protection at all times.

RISK REDUCTION

It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness and blanching
of the fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
WHAT'S IN THE BOX
■ Powerhead and upper boom assembly x 1
■ Lower boom and string head assembly x 1
■ Front handle assembly x 1
■ Grass deflector x 1
■ PRO CUT II string head x 1
■ Retainer knob x 1
■ Cutting line x 10 pcs
■ Speedwinder handle x 1
■ Ethanol shield 2 cycle lubricant x 1
■ Combination wrench x 1
■ Harness x 1
■ Drive shaft x 1
■ Operator's manual x 1
■ Stamping wrench (RLT254CDSO only) x 1

SYMBOLS ON THE PRODUCT

Safety alert
Read and understand all
instructions before operating the
product, follow all warnings and
safety instructions.
Wear eye, hearing and head
protection when operating the
product.
Wear non-slip safety footwear when
using the product.
Wear non-slip, heavy-duty gloves.
Beware of thrown or flying objects.
Keep all bystanders, especially
children and pets, at least 15 m
away from the operating area
The product is not intended for use
with a toothed saw type blade.
Do not use metal blade (s) on the
product
RLT254CDSO: Rotational direction
and maximum speed of the shaft for
the cutting attachment.
RLT254SDSO: Rotational direction
and maximum speed of the shaft for
the cutting attachment.
Use unleaded gasoline intended for
motor vehicle use with an octane
rating of 91 ([R+M]/2) or higher.
Use full synthetic 2-stroke lubricant
for air cooled engines.
Mix the fuel mix thoroughly and also
each time before refueling.
Keep hands away from blades.
"Run" position
"FULL" choke position
"HALF" choke position
Press the primer bulb 10 times.
Squeeze the throttle lock and
throttle trigger to run.
Wait for 10 seconds.
RLT254CDSO: Guaranteed sound
power level and sound pressure
level
RLT254SDSO: Guaranteed sound
power level and sound pressure
level
3