Installation Instructions Original Instructions Power Terminal Block Catalog Numbers 2711-TBDC, 2711P-RTBAP, 2711P-RTBDSP, 2711P-RVAC Topic Page Summary of Changes Before You Begin Power Terminal Blocks With A Locking Tab Power Terminal Blocks With Two Screws Additional Resources This document provides instructions on how to remove and install the AC or DC power terminal block in these PanelView™...
Power Terminal Block Before You Begin The terminals have a three-pin terminal block for power connections. You can remove the terminal block for ease of installation, wiring, and maintenance. WARNING: Explosion Hazard • Substitution of components may impair suitability for hazardous locations. •...
Page 3
Power Terminal Block Install the New Power Terminal Block To install the power terminal block, follow these steps. 1. Press the base of the power terminal block into position. 2. Gently push the top of the terminal block back to the vertical position to snap in the locking tab.
Page 4
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page. Allen-Bradley, PanelView, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400...