Kenwood NX-411 Service Manual page 53

■ Necessary Deviation adjustment item for each signaling and mode
The following shows the necessary adjustment items for each signaling deviation. Please read the following table like the following example. In the case
of the signaling "QT (Analog Narrow)", this signaling is composed of three elements [Balance, Maximum Deviation (Analog Narrow) and QT Deviation
(Analog Narrow)]. Please adjust Balance and Maximum Deviation (Analog Narrow) before adjusting QT Deviation (Analog Narrow).
Mode Signaling
Audio
QT
DQT
Analog
LTR
DTMF
MSK
(FleetSync)
Audio
NXDN
CW ID
• Balance is common with all the above deviation adjustments. If Balance (Transmitter Section 3) has already adjusted, please skip Step1 and adjust from
Step2.
• Maximum Deviation (Analog Narrow) is common with all the analog signaling deviations and CW ID Deviation (NXDN Very Narrow). If Balance and Maximum
Deviation (Analog Narrow) (Transmitter Section 5) have already adjusted, please skip Step2 and adjust from Step3.
ADJUSTMENT
Necessary adjustment and order
Narrow
Step1.Balance adjust
Step2. Maximum Deviation
(Analog Narrow)
Step1. Balance adjust
Step2. Maximum Deviation
(Analog Narrow)
Step3. QT Deviation
(Analog Narrow)
Step1. Balance adjust
Step2. Maximum Deviation
(Analog Narrow)
Step3. DQT Deviation
(Analog Narrow)
Step1. Balance adjust
Step2. Maximum Deviation
(Analog Narrow)
Step3. LTR Deviation
(Analog Narrow)
Step1. Balance adjust
Step2. Maximum Deviation
(Analog Narrow)
Step3. DTMF Deviation
(Analog Narrow)
Step1. Balance adjust
Step2. Maximum Deviation
(Analog Narrow)
Step3. MSK Deviation
(Analog Narrow)
Step1. Balance adjust
Step2. Maximum Deviation
(NXDN Narrow)
-
Very Narrow
-
-
-
-
-
-
Step1. Balance adjust
Step2. Maximum Deviation
(NXDN Very Narrow)
Step1. Balance adjust
Step2. Maximum Deviation
(Analog Narrow)
Step3. CW ID Deviation
(NXDN Very Narrow)
NX-411
53