Kenwood NX-411 Service Manual page 11

■ Assembly information (Sheet/Cushion)
When "Main Parts" is changed (ordered), "Assembled Sheet/Cushion" should also be changed (ordered) together.
The Sticker and Sheet etc are non-reusable parts. It requires the new one to get the radio's performance after repairs.
For example, when "Main Cabinet (A02-4076-11)" is changed, "Sticker (B42-7296-04)", "Badge (B43-1606-04)" and "Fibrous
Sheet (G10-1400-04)" should be ordered and changed together because Sticker (B42-7296-04), Badge (B43-1606-04) and
Fibrous Sheet (G10-1400-04) are non-reusable.
Main Parts
Part Name Part Number
Main Cabinet A02-4076-11
LCD ASSY B38-0923-05
Speaker T07-0749-25
Chassis A10-4132-03
Illumination Guide (LCD) B11-1854-02
Packing (18-key) G53-1823-11
DISASSEMBLY FOR REPAIR
Part Name Part Number
Sticker B42-7296-04
Badge B43-1606-04
Fibrous Sheet (SP) G10-1400-04
Adhesive Sheet (LCD) J99-0714-04
Rubber Cushion (SP) G11-4272-14
Rubber Sheet (FET) G11-4308-24
Sheet (LCD-Holder) G11-4495-14
Sheet (18-key Pack-
G11-4494-04
ing)
Assembled Sheet/ Cushion
Remark
"NEXEDGE" is printed.
"KENWOOD" is printed.
Used for fi xing the LCD ASSY on the Illumination Guide
(LCD).
Also used for fi xing the Illumination Guide (LCD) on the
Control Unit.
Used for stabilizing the radiation performance of the FET.
NX-411
11