The image seen through the finder does not indicate the actual recordable
range.
The parallax phenomenon is occurring when the subject is close. To confirm the recordable
•
range, use the screen.
Cannot shoot images in succession.
The "Memory Stick" is full. Delete unnecessary images (
•
The battery level is low. Install a charged battery pack.
•
Viewing images
Refer to "Computers" (page 80) in conjunction with the following items.
Your camera cannot play back images.
Set the mode dial to
•
The folder/file name has been changed on your computer.
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB communication (page 59).
•
The image appears rough right after playback starts.
The image may appear rough right after playback starts due to image processing. This is not a
•
malfunction.
The image does not appear on the TV screen.
Check [Video Out] to see if the video output signal of your camera is set to the color system of
•
your TV (page 51).
Check whether the connection is correct (page 72).
•
The cable for multi-use terminal is connected. Disconnect it according to the correct
•
procedure (page 60).
Deleting/Editing images
Your camera cannot delete an image.
Cancel the protection (page 38).
•
Set the write-protect switch on the "Memory Stick" to the recording position (page 88).
•
You have deleted an image by mistake.
Once you have deleted an image, you cannot restore it. We recommend that you set protection
•
on an image (page 37), or set the write-protect switch on the "Memory Stick" to the LOCK
position (page 88) to prevent accidental erasure.
(page 23).
step 6 in "Read This First").
t
79