Sony DSC-P200 Fall 2005 User's Manual / Troubleshooting page 82

"Memory Stick"
Cannot insert a "Memory Stick".
Insert it in the correct direction (
•
Cannot record on a "Memory Stick".
Set the write-protect switch on the "Memory Stick" to the recording position (page 88).
•
The "Memory Stick" is full. Delete unnecessary images (
•
Insert a "Memory Stick PRO" (page 21) when recording movies with the image size set to
•
[640(Fine)].
Cannot format a "Memory Stick".
Set the write-protect switch on the "Memory Stick" to the recording position (page 88).
•
You have formatted a "Memory Stick" by mistake.
All the data on the "Memory Stick" is deleted by formatting. You cannot restore it. We
•
recommend that you set the write-protect switch on the "Memory Stick" to the LOCK
position to prevent accidental erasure (page 88).
PictBridge compliant printer
A connection cannot be established.
The camera cannot be connected directly to a printer that is not compliant with the PictBridge
•
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
Check that the printer is turned on and can be connected to the camera.
•
Set [USB Connect] to [PictBridge] in the
•
Disconnect and connect the cable for multi-use terminal again. If an error message is
•
indicated on the printer, refer to the operating instructions supplied with the printer.
Cannot print images.
Check that the camera and the printer are properly connected using the cable for multi-use
•
terminal.
Turn on the printer. For further information, refer to the operating instructions supplied with
•
it.
If you select [Exit] during printing, images may not print. Disconnect and connect the cable
•
for multi-use terminal again. If you still cannot print your images, disconnect the cable for
multi-use terminal, turn the printer off and then on, then connect the cable for multi-use
terminal again.
Movies cannot be printed.
•
Images shot using cameras other than this camera or images modified with a computer may
•
not be printed.
82
step 3 in "Read This First").
t
(Setup) menu (page 51).
step 6 in "Read This First").
t