Printing is canceled.
You disconnected the cable for multi-use terminal before the
•
for multi-use terminal) mark disappears.
Cannot insert the date or print images in the index mode.
The printer does not provide these functions. Consult the printer manufacturer as to whether
•
the printer provides these functions or not.
The date may not be inserted in the index mode depending on the printer. Consult the printer
•
manufacturer.
"---- -- --" is printed on the date-inserted part of the image.
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
•
to [Off] and print the image again (page 69).
Cannot select the print size.
Consult the printer manufacturer as to whether the printer can provide the desired size.
•
Cannot print the image at the size selected.
Disconnect the cable for multi-use terminal and reconnect it whenever you change the paper
•
size after the printer has been connected to the camera.
The print setting of the camera differs from that of the printer. Change the setting of either the
•
camera (page 69) or the printer.
Cannot operate the camera after canceling printing.
Wait for a while as the printer is carrying out the cancellation. It may take some time
•
depending on the printer.
Others
Your camera does not work.
•
Use an "InfoLITHIUM" battery pack (page 90).
The battery level is low (The E indicator appears). Charge the battery pack (
•
"Read This First").
Connect the AC Adaptor securely to the DC IN jack of your camera and to a wall outlet (wall
•
socket) (
step 1 in "Read This First").
t
The power is on, but the camera does not work.
The built-in microcomputer is not working properly. Disconnect, and then, after one minute,
•
reconnect all power sources and turn on the camera. If this does not work, reset the camera
(page 74).
(Do not disconnect cable
step 1 in
t
83