Shooting Still Images/Movies - Sony DSC-P200 Fall 2005 User's Manual / Troubleshooting

Cannot turn on the camera.
Install the battery pack correctly (
•
Properly connect the AC Adaptor.
•
The AC Adaptor has malfunctioned. Consult your Sony dealer or local authorized Sony
•
service facility.
The battery pack is discharged. Install a charged battery pack (
•
First").
The battery pack is dead (page 90). Replace it with a new one.
•
The power turns off suddenly.
If you do not operate the camera for about three minutes while the power is on, the camera
•
turns off automatically to prevent wearing down the battery pack. Turn on the camera again or
use the AC Adaptor (
The battery pack is discharged. Install a charged battery pack (
•
First").

Shooting still images/movies

The screen does not turn on even when the power is turned on.
Turn on the screen (page 20).
•
Your camera cannot record images.
Insert a "Memory Stick" (
•
Check the free capacity of the "Memory Stick" (page 17). If the "Memory Stick" is full, do
•
one of the following:
Delete unnecessary images saved on the "Memory Stick" (
–
Change the "Memory Stick".
–
• Set the write-protect switch on the "Memory Stick" to the recording position (page 88).
• You cannot record images while charging the flash.
Set the mode dial to
•
Set the mode dial to
•
The image size is set to [640(Fine)] when recording movies. Do one of the following:
•
Set the image size to other than [640(Fine)].
–
Insert a "Memory Stick PRO" (page 88).
–
The subject is not visible on the screen.
Set the mode dial to
•
Recording takes a long time.
The NR slow shutter function is activated (page 24). This is not a malfunction.
•
76
step 1 in "Read This First").
t
step 1 in "Read This First").
t
step 3 in "Read This First").
t
, P, M, or SCN when shooting still images.
when shooting movies.
, P, M, SCN, or
t
t
step 6 in "Read This First")
t
(page 23).
step 1 in "Read This
step 1 in "Read This