Shooting Still Images/Movies; Viewing Images - Sony Cyber-shot DSC-T10 Instruction Manual

The battery remaining indicator is incorrect.
• This phenomenon occurs when you use the camenl in an extremely hot or cold loc:ltion.
• The displayed battery remaining difl_rs lbom the current one. Fully discharge and then charge
the battery pack to correct the display.
• The battery pack is discharged, lnstall the charged battery pack (page 9).
• The battery pack is dead. Replace it with a new one.
Your camera cannot record images.
• Check the frec cap_Jcity of the internal memory or "Memory Stick Duo" (pages 2(7, 27). If it is
full, do one of the lk)llowing:
Delete unnecessary images (page 16).
Change the "Memory Stick Duo".
• You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position.
• You cannot record images while charging the flash.
• Set the mode switch to I_ when shooting still images.
• Set the mode switch to 1_ when shooting movies.
• The image size is set to [6411(Fine/] when recording movies. Do one of the following:
Set the image size to other than [640(Fine)].
Insert a "Memory Stick PRO Duo".
Your camera cannot play back images.
• The folder/file name has been changed on your computer.
• When an image file has been processed by a computer or when the image file was recorded
using a model other than that of your camera, playback on your camera is not guaranteed.
• The camera is in USB mode. Delete the USB connection.
29