The date and time are recorded incorrectly.
Set the correct date and time (
•
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 24).
•
Horizontal line appears within the finder.
•
This is due to the structure of the finder. This condition is not a malfunction.
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 30) or adjust the exposure (page 24).
The brightness of the screen is too low. Adjust the brightness of the LCD backlight (page 50).
•
Turn on the screen (page 20).
•
The image is too bright.
You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the
•
exposure (page 24).
The brightness of the screen is too bright. Adjust the brightness of the LCD backlight (page
•
50).
The image colors are not correct.
Picture Effect function is activated. Cancel the Picture Effect function (page 34).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring. This phenomenon is not a malfunction.
•
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] in the
•
Shoot the subject at a distance closer than the recommended shooting distance using the flash
•
(
step 5 in "Read This First").
t
Light the room and shoot the subject.
•
78
step 2 in "Read This First").
t
(Setup) menu to [On] (page 45).