Remove Power cord, Fuse or Switch off the circuit breaker.
Always check appliance with multimeter to ensure the supply power is disconnected.
Use only insulated tools & equipment.
Wear insulated shoes.
No water on the floor or working space.
Reduce the amount of exposed skin, by covering your arms and legs.
Remove jewellery (Rings, Watches etc).
It is essential that you conform to all "Working Live" and "Risk Management" statutory
requirements.
The indoor & outdoor PCB's are fitted with "Positive Lock Terminals".
To remove Positive Lock Terminals: Push the lever forward & lightly pull down on the terminal.
Note: When reconnecting the Positive Lock Terminal, connect it so that the lever faces towards the front
of the unit.
Page 4 KSSSI113
Safe Electrical Working Practices
Positive Lock Terminals
Positive Lock Terminal arrangement.