Led Flash Code Sequence Description - Electrolux KSV26HRC Diagnostic Manual

LED Flash Code Sequence Description (Outdoor PCB)
# In the event of a complete shutdown or an operational control adjustment the outdoor PCB Green,
Yellow & Red LED's flash to indicate this sequence.
Note: The LED's flash at a 1 second rate for the required number of flashes, then a 2 second pause
before repeating the 1 second rate sequence.
Note: Two or more faults can appear in the one LED fault sequence.
# Example of LED sequence:
Mutable fault code sequence.
LED locations on outdoor PCB
Green LED: Outdoor unit, flashing at 1 hertz.
# Normal communication.
Red LED: Outdoor unit, flashing at 8 times.
# Normal operation.
Yellow LED: Outdoor unit, flashing once every two seconds.
# Normal operation.
Page 7 KSSSI113