Copying Images To Your Computer - Sony DSC-N1 Fall 2005 User's Manual / Troubleshooting

Copying images to your computer

This section describes the process using a
Windows computer as an example.
You can copy images from the camera to
your computer as follows.
For a computer with a "Memory Stick"
slot
Remove the "Memory Stick Duo" from the
camera and insert it in the Memory Stick
Duo Adaptor. Insert the Memory Stick Duo
Adaptor in the computer and copy the
images.
For a computer without a "Memory
Stick" slot
Follow Stages 1 through 5 on pages 77 to
82 to copy images.
• The screen displays shown in this section are the
examples for copying images from "Memory
Stick Duo".
Stage 1: Installing the USB
Driver
• A driver is software that enables equipment
connected to the computer to operate properly.
• When using Windows XP, start from Stage 2.
• When "PicturePackage" is already installed,
start from Stage 2.
NOTE: Do not connect the camera to
the computer at this time.
1
Shut down all application
software in use.
• In Windows 2000, log on as Administrator
(authorized Administrators).
2
Insert the CD-ROM into the
computer, then click [USB Driver]
when the install menu screen
appears.
The "InstallShield Wizard" screen
appears.
• If the install menu screen does not appear,
double-click (My Computer)
(PICTUREPACKAGE).
3
Click [Next].
The USB driver installation starts.
When the installation is finished, the
screen informs you of completion.
t
77