The image colors are not correct.
Picture Effect function is activated. Cancel the Picture Effect function (page 52).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring. This phenomenon is not a malfunction.
•
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] in the
•
Shoot the subject at a distance closer than the recommended shooting distance using the flash
•
(
step 6 in "Read This First").
t
Light the room and shoot the subject.
•
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded (page 5,
•
Cannot shoot images in succession.
The internal memory or "Memory Stick Duo" is full. Delete unnecessary images (
•
"Read This First").
The battery level is low. Install a charged battery pack.
•
(Setup) menu to [On] (page 63).
"Read This First").
t
step 7 in
t
103