Setup 4; Calibration - Sony DSC-N1 Fall 2005 User's Manual / Troubleshooting

Cyber-shot® cameras: cyber-shot® digital still camera
Hide thumbs Also See for DSC-N1 Fall 2005:
Table of Contents

Advertisement

Setup 4

4
The default settings are marked with

Calibration

Enables you to perform calibration when the touch panel buttons do not react at the
appropriate points where you touch.
Using the stylus, touch the × mark displayed on the screen.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.
Calibration
Touch the "X"
Cancel
The × mark moves on the screen.
If you fail to press the right spot, the calibration is not performed. Press the × mark again.
Housing
Changes the function of some buttons to operate the camera installed in the Marine Pack.
On (
)
Off
The buttons will work as follows when the setting is [On].
(Screen display on/off) button: Flash button for shooting. It does not work for viewing.
/
(zoom) button: Zoom button for shooting, Previous/next image button for viewing
• Macro recording is activated automatically when the setting is [On].
• For details, see the operating instructions supplied with the Marine Pack.
74
.
1/3
Changes the function of the buttons.
Does not change any functions.
For details on the operation
page 61
t

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cyber-shot dsc-n1

Table of Contents