Smart zoom does not function.
Set [Digital Zoom] to [Smart] (page 62).
•
•
This function cannot be used when:
The image size is set to [8M] or [3:2].
–
Shooting in Multi Burst mode.
–
Shooting movies.
–
The flash does not work.
The flash is set to
•
You cannot use the flash when:
•
[Mode] (REC Mode) is set to [Burst], or [Multi Burst] (page 50).
–
(Twilight mode),
–
mode (page 29).
When the mode switch is set to
–
Set the flash to
•
(Snow mode), or
Fuzzy specks appear in images shot using the flash.
Dust in the air reflected the flash light and appeared in the image. This is not a malfunction.
•
The close-up (Macro) function does not work.
(Twilight mode),
•
selected in the Scene mode (page 29).
The date and time are recorded incorrectly.
Set the correct date and time (
•
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 32).
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 48) or adjust the exposure (page 32).
The brightness of the screen is too low. Adjust the brightness of the LCD backlight (page 71).
•
The image is too bright.
You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the
•
exposure (page 32).
The brightness of the screen is too bright. Adjust the brightness of the LCD backlight
•
(page 71).
102
(No flash) (
step 6 in "Read This First").
t
(Candle mode) or
.
(Forced flash) (
step 6 in "Read This First") when
t
(Beach mode) is selected in the Scene mode.
(Landscape mode),
step 2 in "Read This First").
t
(Fireworks mode) is selected in the Scene
(Candle mode) or
(Landscape mode),
(Fireworks mode) is