Sony Syber-shot DSC-S85 Service Manual
Digital still camera
Hide thumbs
Also See for Syber-shot DSC-S85:
- Operating instructions manual (105 pages) ,
- Training manual (48 pages) ,
- Operating instructions manual (104 pages)
Table of Contents
Advertisement
Quick Links
SERVICE MANUAL
Level 2
Ver 1.1 2001. 08
Differences Manual
• Main differences:
CCD imager changed
(3.4 M pixels t 4.0 M pixels)
This Service Manual covers only differences from
DSC-S75 (Level 2).
In performing repair, refer to DSC-S75 Service
Manual (Level 2) (9-929-891-32) as well as this manual.
DSC-S85
Canadian Model
Hong Kong Model
Australian Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
(SEE PAGE ss): Pages on the original service manual.
<SEE PAGE ss>: Pages on this service manual.
&
: Points added parts.
!
-
: Points deleted parts.
: Points changed parts.
DIGITAL STILL CAMERA
US Model
AEP Model
UK Model
E Model
Advertisement
Table of Contents
Related Manuals for Sony Syber-shot DSC-S85
Summary of Contents for Sony Syber-shot DSC-S85
- Page 1 DSC-S85 SERVICE MANUAL US Model Canadian Model Level 2 AEP Model UK Model E Model Hong Kong Model Ver 1.1 2001. 08 Australian Model Chinese Model Korea Model Tourist Model Japanese Model Differences Manual This Service Manual covers only differences from DSC-S75 (Level 2).
-
Page 2: Specifications
SPECIFICATIONS Output connector General AC-L10A/B/C System NP-FM50 battery pack AC power adaptor A/V OUT (Monaural) Used battery pack Image device Used battery Minijack 8.98 mm (1/1.8 type) NP-FM50 Power requirements Lithium ion ba ttery Video: 1 Vp-p, 75 Ω color CCD Power requirements 100 to 240 V AC, 50/60 Hz Maximum voltage... -
Page 3: Table Of Contents
Ver. 1.1 2001. 08 TABLE OF CONTENTS Section Title Page ADJUSTMENTS 5-1. Camera Section Adjustment ..........4 1-2. Initialization of B, D, E, F, 7, 9 Page Data ......4 1-2-1. Initialization of D Page Data ........4 1. Initializing D Page Data ..........4 1-2-2. -
Page 4: Adjustments
DSC-S85 Ver. 1.1 2001. 08 SECTION 5 ADJUSTMENTS 5-1. CAMERA SECTION ADJUSTMENT 1-2. INITIALIZATION OF B, D, E, F, 7, 9 PAGE DATA 5. F Page Table Note 1: Fixed data-1: Initialized data. 1-2-1. Initialization of D Page Data (Refer to “1.Initializing of B, E, F, 7, 9 Page Data”) 1. - Page 5 Ver. 1.1 2001. 08 Address Initial value Remark Address Initial value Remark 49 to 4C Fixed data-1 (Initialized data) Strobe white balance adj. 4F to 58 Fixed data-1 (Initialized data) Auto white balance standard data input Mechanical shutter adj. Fixed data-1 (Initialized data) Flange back adj.
-
Page 6: Camera System Adjustments
Ver. 1.1 2001. 08 1-4. CAMERA SYSTEM ADJUSTMENTS Before perform the camera system adjustments, check that the specified values of “VIDEO SYSTEM ADJUSTMENTS” are sat- isfied. Note: For “CAMERA SYSTEM ADJUSTMENTS”, perform in order of item numbers. Data setting during camera system adjustments Perform the following data setting before the camera system ad- justments. -
Page 7: Flange Back Adjustment (Using The Minipattern Box)
1. Flange Back Adjustment (Using the minipattern box) Specified voltage: The specified voltage varies according to the The flange back of inner focus lens is adjusted automatically. If minipattern box, so adjustment the power sup- shifted, the auto focus is disordered. ply output voltage to the specified voltage writ- ten on the sheet which is supplied with the mini- Mode... -
Page 8: Flange Back Adjustment
2. Flange Back Adjustment Adjusting method: (Using the flange back adjustment chart) Order Page Address Data Procedure The flange back of inner focus lens is adjusted automatically. If shifted, the auto focus is disordered. Perform “Data setting during Mode CAMERA camera system adjustments”. -
Page 9: Flange Back Check
3. Flange Back Check Mode CAMERA Subject Siemens star chart (1.0 m from the front of the lens) (Luminance: 200 to 400 lux) Measurement Point Check operation on the LCD screen Measuring Instrument Specified value Focused at the TELE end and WIDE end Checking method: Order Page Address Data... -
Page 10: Picture Frame Setting
4. Picture Frame Setting How to reset the zoom and focus when they deviated: Order Page Address Data Procedure Mode CAMERA Subject Color bar chart (Color reproduction adjustment frame with the zoom lens at WIDE end) (Note 2) Measurement Point Video terminal of A/V OUT jack (Note 2) (75 Ω... -
Page 11: F No. Standard Data Input
5. F No. Standard Data Input 6. Mechanical Shutter Adjustment Compensate the unevenness of the iris meter sensitivity. Adjust the period which the mechanical shutter is closed, and com- pensate the exposure. Mode CAMERA Mode CAMERA Subject Clear chart (Color reproduction adjustment Subject Clear chart frame with the zoom lens at WIDE... -
Page 12: Light Level Adjustment
Ver. 1.1 2001. 08 7. Light Level Adjustment 8. Mixed Color Cancel Adjustment Adjust the standard LV value. To perform mixed color cancel adjustment based on data of each color in color bar. Mode CAMERA Mode CAMERA Subject Clear chart (Color reproduction adjustment Subject Color bar chart... -
Page 13: Auto White Balance Standard Data Input
9. Auto White Balance Standard Data Input Adjust the white balance standard data at 3200K. Mode CAMERA Subject Clear chart (Color reproduction adjustment frame with the zoom lens at WIDE end) Adjustment Page Adjustment Address 3A to 3D, 59 Note 1: Check that the data of page: 6, address: 02 is “00”. If not, turn the power of unit OFF/ON. -
Page 14: Auto White Balance Adjustment
Ver. 1.1 2001. 08 10. Auto White Balance Adjustment Order Page Address Data Procedure Adjust to the proper auto white balance output data. If it is not Check that the displayed data correct, auto white balance and color reproducibility will be poor. (Note 3) satisfies the R ratio specified Mode... -
Page 15: Smear Compensation Adjustment
11. Smear Compensation Adjustment Adjust the smear compensation data from white balance standard data at 3200K. Mode CAMERA Subject Clear chart (Color reproduction adjustment frame with the zoom lens at WIDE end) Adjustment Page Adjustment Address 9D, 9E Note 1: Check that the data of page: 6, address: 02 is “00”. If not, turn the power of unit OFF/ON. -
Page 16: Color Reproduction Adjustment
Ver. 1.1 2001. 08 12. Color Reproduction Adjustment Processing after Completing Adjustment: Adjust the color separation matrix coefficient so that proper color Order Page Address Data Procedure reproduction is produced. Press PAUSE button. Mode CAMERA Subject Color bar chart (Color reproduction adjustment frame with the zoom lens at Release the data setting WIDE end) -
Page 17: Color Reproduction Check
Ver. 1.1 2001. 08 13. Color Reproduction Check Processing after Completing Adjustment: Order Page Address Data Procedure Mode CAMERA Press PAUSE button. Subject Color bar chart (Color reproduction adjustment frame with the zoom lens at WIDE end) Measurement Point Video terminal of A/V OUT jack (75 Ω... -
Page 18: Auto White Balance Check
Ver. 1.1 2001. 08 14. Auto White Balance Check OUTDOOR luminance check Place the C14 filter on the Mode CAMERA lens. Subject Clear chart Note down the data. (Color reproduction adjustment frame with the zoom lens at Press PAUSE button. WIDE end) Press PAUSE button. -
Page 19: Ccd White Defect Compensation
Ver. 1.1 2001. 08 15. CCD White Defect Compensation Mode CAMERA Subject Not required Measurement Point Displayed data of page: 6, address: 55 Measuring Instrument Adjusting remote commander Adjustment Page Adjustment Address 88 to A3 Note 1: Check that the data of page: 6, address: 02 is “00”. If not, turn the power of unit OFF/ON. -
Page 20: Ccd Black Defect Compensation
16. CCD Black Defect Compensation Processing after Completing Adjustment: Order Page Address Data Procedure Mode CAMERA Press PAUSE button. Subject Clear chart (Color reproduction adjustment frame) Measurement Point Displayed data of page: 6, address: 55 Set the data noted down at Measuring Instrument Adjusting remote commander step 3, and press PAUSE... -
Page 21: Strobe White Balance Adjustment
17. Strobe White Balance Adjustment Adjusting method: Adjust the white balance when the strobe light flashed. Order Page Address Data Procedure Mode CAMERA Perform “Data setting during Subject Flash adjustment box (Note 3) camera system adjustments”. (1.0 m from the front of the lens) (Refer to page 5-14) Adjustment Page Adjustment Address... -
Page 22: Repair Parts List
DSC-S85 SECTION 6 REPAIR PARTS LIST 6-1. EXPLODED VIEWS 6-1-1. MAIN SECTION (Service manual page 6-1) DSC-S75 DSC-S85 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-069-158-01 PROCESS, (M2) INTERIOR LOCK 3-719-381-01 SCREW (M2X4) 3-069-159-01 PROCESS, (M2) INTERIOR LOCK 3-069-159-11 PROCESS, (M2) INTERIOR LOCK X-3951-668-1 HOLDER ASSY, BATTERY X-3951-783-1 HOLDER ASSY, BATTERY... -
Page 23: Electrical Parts List
6-2. ELECTRICAL PARTS LIST Page DSC-S75 DSC-S85 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark ACCESSORIES ACCESSORIES ************ ************ 3-068-187-01 MANUAL, INSTRUCTION (JAPANESE) (J) 3-068-188-01 MANUAL, INSTRUCTION (JAPANESE) (J) 3-068-187-11 MANUAL, INSTRUCTION (ENGLISH) 3-068-188-11 MANUAL, INSTRUCTION (ENGLISH) (US, CND, AEP, UK, E, AUS, CN, HK, JE) (US, CND, AEP, UK, E, AUS, CN, HK, JE) 3-068-187-21 MANUAL, INSTRUCTION... - Page 24 DSC-S85 2001H0500-1 Sony EMCS Co. Kohda TEC 9-929-905-32 © 2001. 8 – 24 – Published by PV Customer Center...
-
Page 25: Revision History
Reverse 992990532.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2001.06 Official Release — — S. M. correction: Page 3, Page 4, Page 5, Correction Page 6, Page 12, Page 14, 2001.08 (C1 PV01-014) Page 16, Page 17, Page 18, Page 19...