Sony DSC-N1 Fall 2005 User's Manual / Troubleshooting page 110

Printing
Also see "PictBridge compliant printer" (as follows) in conjunction with the following items.
Images are printed with both edges cut off.
When you print an image shot with the image size set to [16:9(HDTV)], both edges of the
•
image may be cut off.
When printing images using your own printer, try canceling the trimming or borderless
•
settings. Consult the printer manufacturer as to whether the printer provides these functions or
not.
• When having images printed at a digital print shop, ask the shop whether they can print the
images without cutting off both edges.
PictBridge compliant printer
A connection cannot be established.
The camera cannot be connected directly to a printer that is not compliant with the PictBridge
•
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
• Check that the printer is turned on and can be connected to the camera.
Set [USB Connect] to [PictBridge] in the
•
Disconnect and connect the cable for multi-use terminal again. If an error message is
•
indicated on the printer, refer to the operating instructions supplied with the printer.
Nothing appears on the camera screen when a USB connection is made.
The switch on the cable for multi-use terminal is set to "TV". Set to "CAMERA" (page 92).
•
Cannot print images.
Check that the camera and the printer are properly connected using the cable for multi-use
•
terminal.
• Turn on the printer. For further information, refer to the operating instructions supplied with
the printer.
If you select [Exit] during printing, images may not print. Disconnect and connect the cable
•
for multi-use terminal again. If you still cannot print your images, disconnect the cable for
multi-use terminal, turn the printer off and then on, then connect the cable for multi-use
terminal again.
You cannot print movies or the images saved in the Album.
•
Images shot using cameras other than this camera or images modified with a computer may
•
not be printed.
Printing is canceled.
You disconnected the cable for multi-use terminal before the
•
for multi-use terminal) mark disappears.
110
(Setup) menu (page 72).
(Do not disconnect cable