FUTABA T14SG Software Update Manual page 6

Hide thumbs Also See for T14SG:

④ Once it scrolls to the mode of your choice,

touch the RTN button.

⑤ Set the transmitter's displayed speed.

Adjust the gover nor's speed display

on its side. (Refer to your gover nor's

instruction manual on how to make proper

adjustments).

6.Fault corrections

① Incorrect model condition naming from

8FG model data has been corrected.

② Operating failures which may have

occurred when the logic and condition

switches had identical settings have been

corrected.

② Operating failures which may have

occurred when the logic and condition

switches had identical settings have been

corrected.

③ When a power supply is turned on in the

case of -5 ℃ (23 ° Ｆ )low temperature,

there is a defect from which 14SG is set to

<POWER MODE> to unexpected.

(Usually, it should be set to <POWER

MODE>, if a power supply is turned on

after touching RTN next.)

This problem will be solved if it updates to

Ver1.51 from Ver1.5.

FUTABA CORPORATION

Phone: +81 475 32 6982, Facsimile: +81 475 32 6983

1080 Yabutsuka, Chosei-mura, Chosei-gun, Chiba 299-4395, Japan

2013, 06

(1)

-6-