Graco Sequel 65/Sequence 65 Instruction Manual
  1. Manuals
  2. Brands
  3. Graco Manuals
  4. Car Seat
  5. Sequel 65/Sequence 65
  6. Instruction manual

Graco Sequel 65/Sequence 65 Instruction Manual

Convertible car seat
Hide thumbs

Advertisement

Table of Contents

www.gracobaby.com
Sequel
65/Sequence
65
™
™
CONVERTIBLE CAR SEAT
Do not install or use this child restraint
until you read and understand the
instructions in this manual.
FAILURE TO PROPERLY USE THIS CHILD
RESTRAINT INCREASES THE RISK OF
SERIOUS INJURY OR DEATH IN A SUDDEN
STOP OR CRASH.
PD349423D 10/17

Advertisement

Table of Contents
loading

Related Manuals for Graco Sequel 65/Sequence 65

Summary of Contents for Graco Sequel 65/Sequence 65

  • Page 1 www.gracobaby.com Sequel 65/Sequence ™ ™ CONVERTIBLE CAR SEAT Do not install or use this child restraint until you read and understand the instructions in this manual. FAILURE TO PROPERLY USE THIS CHILD RESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
  • Page 2 1 Important Pages 6-23 1-A A Quick Guide to Your Manual 1-B Welcome to the Graco Family 1-C Right Mode of Use 1-D Before You Begin Register This Car Seat If You Need Help Certification Car Seat’s Useful Life Vehicle Seat Protection...

  • Page 3: Rear-Facing Use

    3 Rear-Facing Use Pages 30-47 3-A Rear-Facing 3-B Installing Rear-Facing With LATCH Straps 3-C Install Rear-Facing With Vehicle Seat Belt 4 Forward-Facing Use Pages 48-61 4-A Forward-Facing 4-B Installing Forward-Facing With LATCH Straps 4-C Install Forward-Facing With Vehicle Seat Belt...

  • Page 4: Securing Child

    5 Securing Child Pages 62-69 5-A Securing Child 5-Point Harness 6 Accessories Pages 70-71 7 Moving the LATCH Strap Pages 72-74...

  • Page 5: Additional Information

    8 Additional Information Pages 75-85 8-A How to Remove LATCH and Top Tether 8-B Choosing Vehicle Seat Location 8-C Unsafe Vehicle Seat Locations 8-D Vehicle Seat Belts 9 Cleaning Seat Pad Pages 86-92 9-A Cleaning Seat Pad 9-B Cleaning Crotch Buckle 9-C Cleaning Harness and LATCH Straps...
  • Page 6 1-A A Quick Guide to Your Manual This car seat is for children: Rear-Facing: 4-40 lb (1.8-18 kg) Forward Facing: 22-65 lb (10-30 kg) • Children less than 22 lb (10 kg) MUST use this car seat rear-facing. Review section 1-C for more information.
  • Page 7 What Seating Location Should I Use? The best seating location for this car seat is one that: • Is recommended by your vehicle owner’s manual, and • Results in a secure installation of this car seat. Some vehicles have specific requirements for where the car seat can be installed, so be sure to check your vehicle owner’s manual for available seating positions, if any.
  • Page 8 What is LATCH? LATCH consists of lower anchors and top tether anchors, which are built- in to your vehicle, and connecting hooks that are built-in to your car seat. Lower anchors are used INSTEAD of the vehicle’s seat belt to secure the child seat to the vehicle.
  • Page 9 When Installing Rear-Facing & Forward-Facing LATCH System LATCH consists of two lower anchors, which are built-in to your vehicle, and connecting hooks that are built-in your car seat. Review section 3-B & 4-B of this manual AND your vehicle owner’s manual. If allowed by your Vehicle Owners Manual, the center seating position may be used if the anchor spacing is 11”...
  • Page 10 Does Your Car Seat Fit Your Child Correctly? To make sure your child is secured properly, review section 3 and 4 to understand all of the actions you need to take to properly adjust the car seat to fit your child. For Rear-Facing, You Need to Adjust: Harness Height, Rear-Facing (A) Harness straps at or just below the child’s...
  • Page 11 For Forward-Facing, You Need to Adjust: Harness Height, Forward-Facing (A) Harness straps at or just above the child’s shoulders and top of child’s ears below top of headrest (B). Review section 5. Buckle Position (C) The crotch strap must be in the front-most slot when forward facing.

  • Page 12: Rear-Facing Installation

    Cannot Pinch Harness Straps at the Shoulder (E) Review section 5 LABEL SPECIFICATIONS LABEL NUMBER: PD349436A DESCRIPTION:LABEL-CARSEAT-SEQUEL 65-LEVEL INDICATOR LABEL MUST PASS GRACO LABEL SPECIFICATIONS DIMENSIONS: 1.75" X 1.995" DIE CUT DOES NOT PRINT CORNERS: ROUNDED 0.2" COLOR: BACKGROUND: WHITE...

  • Page 13: Forward-Facing Installation

    Forward-Facing Installation Use the top tether strap when using forward-facing (A) When used properly, the top tether helps reduce injury in a sudden stop or crash. Review section 4 Car Seat Does Not Move More than 1” (2.5 cm) at the Belt Path (B) Review section 4 Harness Straps at or Just...
  • Page 14 1-B Welcome to the Graco Family! Your child’s safety depends on you. No car seat can guarantee protection from injury in every situation, but proper use helps reduce the risk of serious injury or death. Even if this car seat seems easy to figure out on your own, you must follow the detailed instructions in this instruction manual to ensure the steps below are performed correctly.
  • Page 15 According to the AAP , these infants may suffer breathing issues if improperly reclined in a car seat. When rear-facing, use the corrected age for preemies. Graco advises that you have your physician or hospital staff evaluate your infant and recommend the proper car seat or car bed...
  • Page 16 Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address, and the restraint’s model number and manufacturing date to: Graco Children’s Products, Inc. Attn: Customer Service P .O. Box 169, Elverson, PA 19520-9901...
  • Page 17 For future reference or if you change addresses, record the model name, model number, date of manufacture and purchase date of this car seat on the below. You can find this information either on the registration card if you still have it or on the date label located on the back of the car seat.
  • Page 18 STOP using this car seat and throw it away 10 years after the date of manufacture. Look for this sticker on back of the car seat. Graco Children’s Products Inc. advises against loaning or passing along a car seat unless you know the complete history of the product. We also advise against purchasing a car seat second hand.
  • Page 19 Warm Weather Use Car seat parts can get very hot in the sun or warm weather. To avoid burns, always check before putting child in car seat. cing 1-E Safety Warnings No car seat can guarantee protection from injury in every situation, but proper use helps reduce the risk of serious injury or death.
  • Page 20 NEVER PLACE THIS CHILD RESTRAINT REAR-FACING IN A VEHICLE SEATING LOCATION THAT HAS AN ACTIVE FRONT AIR BAG. If an air bag inflates, it can hit the child and car seat with great force and cause serious injury or death to your child. Review your vehicle owner’s manual for more information about air bags and car seat use.
  • Page 21 The American Academy of Pediatricians (AAP) and National Highway Safety Administration (NHTSA) recommend that children ride rear-facing until the age of 2 or until they reach the maximum rear-facing height or weight rating for their seat, and when forward-facing, children should use the built- in harness system for as long as possible until they reach the maximum forward-facing weight or height for their car seat.
  • Page 22 DO NOT use car seat if it is damaged or missing parts. DO NOT use accessories or parts other than those provided by Graco. Their use could alter the performance of the car seat. DO NOT remove LATCH system from car seat. If using vehicle seat...
  • Page 23 Never leave child unattended, even when sleeping. Child may become tangled in harness straps and suffocate or strangle. Rear-facing car seat must be properly leveled: • Too reclined can result in injury or ejection. • Too upright can result in breathing difficulties. Never attach two LATCH connectors to one vehicle lower anchor point unless specifically allowed by the vehicle manufacturer.
  • Page 24 2-A Car Seat Features...
  • Page 25 A Height Adjust Lever B Headrest C Harness Cover D Cupholder E Harness Adjustment Strap F Chest Clip G Harness Buckle H Harness Release Lever (under seat pad) I Base Recline Handle...

  • Page 27: Level Indicator

    A Tether Storage B Tether Hook C Tether Adjuster D Tether Strap E LATCH Storage F LATCH Strap G LATCH Adjuster H Cup Holder I. Level Indicator...
  • Page 29 A Tether Strap B Harness Straps C LATCH Storage Bars D Splitter Plate E Instruction Manual Storage F Tether Storage Bar G Tether Hook...
  • Page 30 • 3-A Rear-Facing Rear-Facing: 4-40 lb (1.8-18 kg) • Infants who weigh less than 22 lb (10 kg) chil MUST be rear-facing. or u heig • Place car seat rear-facing in the vehicle back seat. • Make sure LATCH strap or vehicle seat belt is routed through the rear-facing belt path LATCH Strap marked with a blue label.
  • Page 31 • Harness straps need to be even with or just below the top of child’s shoulders and chest clip is at armpit level. The AAP and NHTSA recommend that children ride rear-facing until the age of 2 or until they reach the maximum rear-facing height or weight rating for their car seat.
  • Page 32 When reading the level indicator, Vehicle MUST be on level ground. Use corrected age for preemies. - If the ball is entirely in light blue, the restraint is level for infants 0+ months in age. - If the ball is in light blue and dark blue, the restraint is level for a child 3+ months in age.
  • Page 33 3-B Installing Rear-Facing With LATCH Straps Review your vehicle’s owner manual for LATCH location and use. 1. Store Top Tether Strap Attach tether hook to the plastic bar on right side of the car seat. 2. Remove LATCH Strap from Storage Location Press in on the hook’s spring.
  • Page 34 3. Make Sure LATCH Strap is in the Rear-Facing Belt Path Marked With a Blue Label If not, See section 7 to move LATCH strap. 4. Recline the Car Seat Pull out on handle on front of child restraint and adjust to one of the 3 rear-facing positions.
  • Page 35 5. Place Car Seat Rear-Facing in Back Seat of the Vehicle Place rear-facing in vehicle seat and center the car seat between the lower LATCH anchors. The base should sit as flat as possible on the vehicle seat. continue next page...
  • Page 36 6. Make Sure Base is a minimum of 80% on Vehicle Seat. 7. Check the Level Indicator Vehicle MUST be on level ground. Ball must be completely in the blue zone. Readjust the incline if needed. Or if needed, rolled towels may be placed under the car seat at the vehicle seat crease, until the ball is completely in the blue zone.
  • Page 37 8. Extend the LATCH Strap. For easier installation, extend the LATCH strap to its maximum length by pressing the grey button and pulling on the strap. 9. Attach LATCH Connectors to Vehicle’s Lower LATCH Anchors. LATCH strap should lie flat and not be twisted.
  • Page 38 10. Tighten the LATCH Strap Press down firmly in the center of the car seat while tightening the LATCH strap. You may need to tighten through the rear- facing belt path as shown. 11. Test For Tightness Grab the sides of the seat where the LATCH strap is and slide the car seat side-to-side and front-to-back.
  • Page 39 See section 5 to secure your child. LABEL SPECIFICATIONS Recheck level indicator with child in LABEL NUMBER: PD349436A seat. DESCRIPTION:LABEL-CARSEAT-SEQUEL 65-LEVEL INDICATOR LABEL MUST PASS GRACO LABEL SPECIFICATIONS DIMENSIONS: 1.75" X 1.995" DIE CUT DOES NOT PRINT CORNERS: ROUNDED 0.2" COLOR: BACKGROUND: WHITE...
  • Page 40 Harness Straps at or Just Below the Child’s Shoulders. LABEL SPECIFICATIONS Review section 5 LABEL NUMBER: PD349436A DESCRIPTION:LABEL-CARSEAT-SEQUEL 65-LEVEL INDICATOR LABEL MUST PASS GRACO LABEL SPECIFICATIONS DIMENSIONS: 1.75" X 1.995" DIE CUT DOES NOT PRINT CORNERS: ROUNDED 0.2" COLOR: BACKGROUND: WHITE...
  • Page 41 3-C Install Rear-Facing with Vehicle Seat Belt 1. Store Top Tether and LATCH Strap Attach tether hook and LATCH connectors to the plastic bars as shown. 2. Recline the Car Seat Pull out on handle on front of child restraint and adjust to one of the 3 rear-facing positions.
  • Page 42 3. Place Car Seat Rear-Facing in Back Seat of the Vehicle Place rear-facing in vehicle seat. The base should sit as flat as possible on the vehicle seat. 4. Make Sure Base is a minimum of 80% on Vehicle Seat.
  • Page 43 LABEL SPECIFICATIONS LABEL NUMBER: PD349436A DESCRIPTION:LABEL-CARSEAT-SEQUEL 65-LEVEL INDICATOR LABEL MUST PASS GRACO LABEL SPECIFICATIONS DIMENSIONS: 1.75" X 1.995" DIE CUT DOES NOT PRINT CORNERS: ROUNDED 0.2" COLOR: BACKGROUND: WHITE...
  • Page 44 Review your vehicle’s owner manual for vehicle seat belt use 6. Route the Vehicle Seat Belt Thread vehicle seat belt through the rear-facing belt path (marked with a blue label) and out the other side. Buckle it. The seat belt should lie as flat as possible and not be twisted.
  • Page 45 7. Lock Vehicle Seat Belt In most vehicles today, slowly pull the shoulder belt all the way out and then let it go back in. You will hear a clicking sound. Slowly pull out on the belt and it should be locked. If not, review your car’s owner manual and section 8-D.
  • Page 46 See section 5 to secure your child. Recheck level indicator with child in seat. LABEL SPECIFICATIONS LABEL NUMBER: PD349436A DESCRIPTION:LABEL-CARSEAT-SEQUEL 65-LEVEL INDICATOR LABEL MUST PASS GRACO LABEL SPECIFICATIONS DIMENSIONS: 1.75" X 1.995" DIE CUT DOES NOT PRINT CORNERS: ROUNDED 0.2" COLOR:...
  • Page 47 Harness Straps at or Just Below the Child’s Shoulders. Review section 5 LABEL SPECIFICATIONS LABEL NUMBER: PD349436A DESCRIPTION:LABEL-CARSEAT-SEQUEL 65-LEVEL INDICATOR LABEL MUST PASS GRACO LABEL SPECIFICATIONS Chest Clip Even With Armpits DIMENSIONS: 1.75" X 1.995" DIE CUT DOES NOT PRINT CORNERS: ROUNDED 0.2" COLOR:...
  • Page 48 4-A Forward-Facing Forward-Facing: 22-65 lb (10-30 kg) and 49 inches (125 cm) or less and at least one year old • The crotch strap must be in the front- most slot when forward facing. • Place car seat forward-facing in the LATCH Strap vehicle back seat.
  • Page 49 • Install this car seat tightly in your vehicle. Car seat should not move at the forward-facing belt path more than 1”. (2.5 cm) from side to side, front to back. • Harness straps need to be even with or just above the top of child’s shoulders and chest clip is at armpit level.
  • Page 50 4-B Install Forward-Facing 4. R with LATCH Straps Do not Review your vehicle’s owner manual for LATCH location and use. install by this method for a child weighing over 45 lb (20 kg). 1. Remove LATCH Strap from Storage Location 2.
  • Page 51 4. Recline the Car Seat Pull out on handle on front of child restraint and adjust to one of the 3 forward-facing positions. 5. Place Car Seat Forward-Facing in trap. Back Seat of the Vehicle Place forward-facing in vehicle seat and center the car seat between the lower LATCH anchors.
  • Page 52 6. Make Sure Base is a minimum 80% on Vehicle Seat. 7. Extend the LATCH Strap. For easier installation, extend the LATCH strap to its maximum length by pressing the grey button and pulling on the strap. 8. Attach LATCH Connectors to Vehicle’s Lower LATCH Anchors.
  • Page 53 9. Tighten the LATCH Strap Press down firmly in the center of the car seat while tightening the LATCH strap. 10. Attach Top Tether Strap Extend the top tether by pressing the grey button and pulling on the strap and attach. Consult vehicle’s owner manual for specific location.
  • Page 54 11. Tighten Top Tether Strap Remove all the slack. 12. Test For Tightness Grab the sides of the seat where the LATCH strap is and slide the car seat side-to-side and front-to-back. If the seat moves less than 1” (2.5 cm), it is tight enough.
  • Page 55 Is Everything Correct? Car Seat Does Not Move More than 1” (2.5 cm) at the Belt Path Harness Straps at or Just Above the Child’s Shoulders. Review section 5 Chest Clip Even With Armpits Review section 5 Cannot Pinch Harness Straps at the Shoulder Review section 5...
  • Page 56 4-C Install Forward-Facing with 3. U Vehicle Seat Belt 1. Store LATCH Strap Attach LATCH connectors to the plastic bars as shown. 2. Recline the Car Seat Pull out on handle on front of child restraint and adjust to one of the 3 forward-facing positions.
  • Page 57 3. Unhook Top Tether Strap From Storage Unhook tether and lay it in the seat. 4. Place Car Seat Forward-Facing in Back Seat of the Vehicle Place forward-facing in vehicle seat. The base should sit as flat as possible on the vehicle seat.
  • Page 58 Review your vehicle’s owner manual for vehicle seat belt use 6. Route the Vehicle Seat Belt Thread vehicle seat belt through the forward-facing belt path (marked with a orange label) and out the other side. Buckle it. The seat belt should lie as flat as possible and not be twisted.
  • Page 59 8. Tighten the Vehicle Seat Belt Press down firmly in the center of the car seat. Pull on the shoulder belt to tighten while feeding the slack back in the retractor. 9. Attach Top Tether Strap Extend the top tether by pressing the grey button and pulling on the strap and attach.
  • Page 60 11. Test For Tightness Grab the sides of the seat where the vehicle seat belt is and slide the car seat side-to-side and front-to-back. If the seat moves less than 1” (2.5 cm), it is tight enough. See section 5-A to secure your child.
  • Page 61 Is Everything Correct? Car Seat Does Not Move More than 1” (2.5 cm) at the Belt Path Harness Straps at or Just Above the Child’s Shoulders. Review section 5 Chest Clip Even With Armpits Review section 5 Cannot Pinch Harness Straps at the Shoulder Review section 5...
  • Page 62 WARNING! Do not put snowsuits or bulky garments on your child when placing them in the car seat. Bulky clothing can prevent the harness straps from being tightened properly. To keep child warm, buckle your child in the car seat and place a blanket around the child or place the child’s coat on backwards after buckling in.
  • Page 63 Unbuckle the chest clip and the crotch buckle.
  • Page 64 2. Place Your Child in the Seat Make sure their back is flat against the car seat back. Avoid bulky or heavy clothing. Doing so will prevent the harness straps from being tightened properly. Place a blanket over the child after you have secured the child. 3.

  • Page 65: Forward-Facing

    4. Be Sure the Harness Straps Are at the Proper Height Rear-Facing: Harness straps should be at or just below the child’s shoulders. Top of head must be 1” (2.5 cm) below the headrest Rear-Facing adjustment lever. Forward-Facing: Harness straps should be at or just above the child’s shoulders.
  • Page 66 5. To Raise or Lower Headrest/ Harness Height Squeeze the adjustment handle and move headrest for the proper harness height. 6. Check the Buckle Position The correct slot is the one that is closest to your child without being underneath them.
  • Page 67 7. To Adjust Crotch Strap Recline the car seat and locate the metal retainer under the car seat shell. 8. Rotate Metal Retainer and Insert It Up Through the Shell and Pad From the top of the car seat, pull the crotch buckle out.
  • Page 68 10. Pull Up on Crotch Strap to Make Sure it is Secured 11. Buckle the Chest Clip You will hear a “click” when the chest clip is securely buckled. 12. Pull All the Slack Out From Around the Waist Pull up on the harness strap while pushing the chest clip down.
  • Page 69 13. Tighten the Harness by Pulling the Harness Adjustment Strap When you are not able to pinch any of the harness webbing at your child’s shoulder, the harness is tight enough. A snug harness should not allow any slack. It lies in a relatively straight line without sagging.
  • Page 70 6-A Accessories (on select models) Harness Covers Make sure that harness covers do not interfere with placement of the chest clip at armpit level. To remove, undo the fastening strips and remove.

  • Page 71: Body Support

    Body Support Use only in the rear-facing mode. Body support must be used if shoulders are below the lowest harness setting. Never allow body support to bunch or fold behind child.
  • Page 72 7-A Moving the LATCH Strap 1. For Ease of Moving the LATCH Strap A. Undo Snaps and fastening strips in front of child restraint. B. Pull the LATCH straps out of the belt path opening, so that the LATCH hooks end up on the same side of the child restraint.
  • Page 73 2. Slide Entire LATCH Strap Along Bar to Correct Belt Path Opening Rear-Facing: Slide LATCH strap down to the blue label. Forward-Facing: slide the LATCH strap up to the orange label. 3. Feed the LATCH Connector with the Adjuster Closest to it Through the Chosen Belt Path Rear-Facing: Make sure the LATCH strap is in front of the buckle strap when...
  • Page 74 Forward-Facing: Make sure the strap is flat and not twisted. 4. Replace the Seat Pad Fabric on the Front of the Child Restraint.
  • Page 75 8-A How to Remove LATCH and Top Tether LATCH Push gray button in while pulling on LATCH strap to loosen. Press in on the hook’s spring. Push hook in, lift hook up, twist and pull out away from anchor point. Top Tether Strap To remove, press the grey button and pull on the strap to release...
  • Page 76 8-B Choosing Vehicle Seat Location Review your vehicle owner’s manual for seating locations. The best seating location for this car seat is one that: • Is recommended by your vehicle owner’s manual, and • Results in a secure installation of this car seat In the event there is no available back seat and / or you have no other option than to place a child in a front passenger seating position (other than rear-facing), the National Highway Traffic Safety Administration (NHTSA) recommends that you take...
  • Page 77 8-C Unsafe Vehicle Seat Locations Never install this car seat in any of the following vehicle seating locations: rear-facing with an rear-facing or side-facing active front air bag vehicle seats...
  • Page 78 8-D Vehicle Seat Belts Review your vehicle owner’s manual for vehicle seat belt use This car seat can be installed using a vehicle seat belt. To do this, you will need to change the seat belt to a locked mode for use with car seats. With some vehicle seat belts, this is done with the latchplate;...
  • Page 79 Identify Your Seat Belt Type There are two different types of vehicle seat belts that can be used with this car seat: Lap/Shoulder Belt Lap Belt Only 3 connections points. Can be used in 2 connection points. all car seats modes of use. The following types of vehicle seat belts CANNOT be used safely with this car seat: Lap Belt with Motorized Lap Belt or Shoulder...
  • Page 80 Switchable. If it can still be pulled out freely, it is ELR. Note: Most vehicles manufactured after 1996 will have Switchable retractors in the back seat. If you have any questions about your retractor type, consult your vehicle owner’s manual or call Graco for assistance.
  • Page 81 How to Lock Your Lap and Shoulder Vehicle Seat Belt Sliding Latch Plate and Switchable Retractor A latchplate that slides freely on the belt webbing and cannot, by itself, hold the belt snug around a car seat. When installing the car seat, route the vehicle seat belt through the proper belt path and buckle it in.
  • Page 82 Locking Latchplate and ELR Retractor A latchplate that holds the lap belt snug after it has been adjusted; contains a metal bar on the underside of the hardware that “locks” the belt in position. When installing the car seat, route the vehicle seat belt through the proper belt path and buckle it in.
  • Page 83 Sliding Latch Plate and ALR Retractor A latchplate that slides freely on the belt webbing and cannot, by itself, hold the belt snug around a car seat. Slowly pull the shoulder belt all the way out. Route the vehicle seat belt through the proper belt path and buckle it in.
  • Page 84 Sliding Latch Plate and ELR Retractor A latchplate that slides freely on the belt webbing and cannot, by itself, hold the belt snug around a car seat. With this retractor, you will need to use the locking clip to lock the vehicle seat belt. To get a locking clip order online at gracobaby.com or call 1-800 345-4109 Route the vehicle seat belt through the...
  • Page 85 Lap Belt Installation Always review your vehicle owner’s manual for specific information about your vehicle seat belts. Locking Latch Plate and No Retractor When installing the car seat, route the lap seat belt through the proper path and Grab the sides of the seat at the belt buckle it in.
  • Page 86 9-A Cleaning Seat Pad Clean with a damp sponge using mild soap and cool water. Refer to seat pad care tag for washing instructions. Your model determines how to remove the seat pad. Follow the instructions that match your seat. Seat Pad (on most models) Raise the headrest all the way up.
  • Page 87 Unbuckle the chest clip and the buckle strap. Face the rear of the seat and remove the belt straps from splitter plate as shown.
  • Page 88 Grab hold of the shoulder straps and pull them out of their slots on the seat pad. From the back of the seat, undo the elastic straps and plastic hooks. Undo both plastic hooks from the front of the seat.
  • Page 89 Remove pad from shell. Machine wash pad in cold water on delicate cycle and drip-dry. DO NOT USE BLEACH. To put the seat pad back on, reverse preceding steps. Make sure that you rethread the harness straps OVER THE METAL BAR. The harness straps MUST not be twisted.
  • Page 90 Head Support Cover Undo elastic loop underneath head support cover. Pull tab out from behind head support. Undo the elastic loops on the sides of the headrest. Peel cover off head support. Machine wash pad in cold water on delicate cycle and drip-dry. DO NOT USE BLEACH.
  • Page 91 9-B Cleaning Crotch Buckle Recline the car seat and locate the metal retainer. Rotate the metal retainer up through the shell and pad. From the front, pull the crotch buckle out. To clean buckle, place in a cup of warm water and gently agitate the buckle.
  • Page 92 9-C Cleaning Harness and LATCH Straps Surface wash only with mild soap and damp cloth. DO NOT IMMERSE THE HARNESS STRAPS or LATCH STRAP IN WATER Doing so may weaken the straps. If harness straps or LATCH belt are frayed or heavily soiled, contact Customer Service at www.gracobaby.com or 1-800-345-4109.
  • Page 93 Notes:...
  • Page 94 Notes:...
  • Page 95 Notes:...

  • Page 96: Replacement Parts

    Replacement Parts To purchase parts or accessories in the United States, please contact us at the following: www.gracobaby.com 1-800-345-4109 Store instruction manual behind the tab with the instruction book icon as shown.

This manual is also suitable for:

Pd349423d 10/17

Table of Contents