Table of Contents
Advertisement
Automatic Climate Control Descriptions
Icon
MAX A/C Button
Press and release to change the current setting, the indicator illuminates when MAX A/C is on. Performing this function again will cause
the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off.
NOTE:
The MAX A/C button is only available on the touchscreen.
A/C Button
Press and release to change the current setting, the indicator illuminates when A/C is on.
Recirculation Button
Press and release this button on the touchscreen, or push the button on the faceplate, to change the system between recirculation mode
and outside air mode. Recirculation can be used when outside conditions such as smoke, odors, dust, or high humidity are present.
Recirculation can be used in all modes. Recirculation may be unavailable (button on the touchscreen greyed out) if conditions exist that
could create fogging on the inside of the windshield. The A/C can be deselected manually without disturbing the mode control section.
Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is
not recommended.
AUTO Button
Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Toggling this function will cause the
system to switch between manual mode and automatic modes.
Refer to "Automatic Operation" within this section for more information.
Front Defrost Button
Press and release to change the current airflow setting to Defrost mode. The indicator illuminates when this feature is on. Air comes
from the windshield and side window demist outlets. When the defrost button is selected, the blower level may increase. Use Defrost
mode with maximum temperature settings for best windshield and side window defrosting and defogging. When toggling the Front
Mode Defrost button, the climate system will return to the previous setting.
34
Description
Advertisement
Table of Contents
