To Vary The Acc Speed - Chrysler 300 2019 User Manual

WARNING!
safe operation. Failure to follow these warnings
can result in a collision and death or serious
personal injury.

To Vary The ACC Speed

To Increase Speed
While ACC is set, you can increase the set speed by
pushing the SET (+) button.
The driver's preferred units can be selected through
the instrument panel settings if equipped. Refer to
"Getting To Know Your Instrument Panel" in your
Owner's Manual for further information. The speed
increment shown is dependant on the chosen speed
unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (+) button once will result in a
1 mph increase in set speed. Each subsequent tap
of the button results in an increase of 1 mph.
• If the button is continually pushed, the set speed
will continue to increase in 5 mph increments until
the button is released. The increase in set speed is
reflected in the instrument cluster display.
114
Metric Speed (km/h)
• Pushing the SET (+) button once will result in a
1 km/h increase in set speed. Each subsequent tap
of the button results in an increase of 1 km/h.
• If the button is continually pushed, the set speed
will continue to increase in 10 km/h increments
until the button is released. The increase in set
speed is reflected in the instrument cluster display.
To Decrease Speed
While ACC is set, the set speed can be decreased
by pushing the SET (-) button.
The driver's preferred units can be selected through
the instrument panel settings if equipped. Refer to
"Getting To Know Your Instrument Panel" in your
Owner's Manual for further details. The speed dec-
rement shown is dependant on the chosen speed
unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (-) button once will result in a
1 mph decrease in set speed. Each subsequent tap
of the button results in a decrease of 1 mph.
• If the button is continually pushed, the set speed
will continue to decrease in 5 mph decrements
until the button is released. The decrease in set
speed is reflected in the instrument cluster display.
Metric Speed (km/h)
• Pushing the SET (-) button once will result in a
1 km/h decrease in set speed. Each subsequent tap
of the button results in a decrease of 1 km/h.
• If the button is continually pushed, the set speed
will continue to decrease in 10 km/h decrements
until the button is released. The decrease in set
speed is reflected in the instrument cluster display.
NOTE:
• When you override and push the SET (+) button
or SET (-) buttons, the new set speed will be the
current speed of the vehicle.
• When you use the SET (-) button to decelerate, if
the engine's braking power does not slow the ve-
hicle sufficiently to reach the set speed, the brake
system will automatically slow the vehicle.