Opening Sunroof; Closing Sunroof; Opening Power Shade - Chrysler 300 2019 User Manual

Hide thumbs Also See for 300 2019:
Table of Contents

Advertisement

Opening Sunroof

The sunroof has three modes of open operation:
Express Open, Manual Open, and Vent Open. If
the sunshade is in the closed position when initiating
a sunroof open or vent command, the sunshade will
automatically open to the half open position prior to
the sunroof opening.
Express Open
Push the switch rearward and release it within one-
half second, the sunroof and sunshade will open
automatically and stop at full open position. During
Express Open operation, any other actuation of the
sunroof switches will stop the sunroof in a partially
open position.
Manual Open
Push and hold the switch rearward, the sunroof and
sunshade will open and automatically stop at full
open position. Releasing the switch while the sun-
roof is in motion will stop the sunroof in a partially
open position.
42
Vent Open
Push and release the Vent switch within one-half
second and the sunroof will open to the vent posi-
tion. During Express Vent operation, any other ac-
tuation of the sunroof switches will stop the sunroof
operation.

Closing Sunroof

Express Close
Push the switch forward and release it within one-
half second and the sunroof will close automatically
from any position. During Express Close operation,
any other actuation of the sunroof switches will stop
the sunroof in a partially open position.
Manual Close
Push and hold the switch forward and the sunroof
will close from any position and stop at full closed
position. Releasing the switch while the sunroof is in
motion will stop the sunroof in a partially open
position.

Opening Power Shade

The sunshade has two programmed positions: half
open and full open positions. When operating the
sunshade from the closed position, the sunshade
will always stop at the half open position regardless
of express or manual open operation. The switch
must be actuated again to continue on to full open
position.
Express Open
Push the sunshade switch rearward and release it
within one-half second, the sunshade will open to
the half open position and stop automatically. Push
and release the switch again from the half open
position and the sunshade will open to the full open
position and stop automatically. During Express
Open operation, any other actuation of the sunroof
switches will stop the sunshade in a partially open
position.

Advertisement

Table of Contents
loading

Table of Contents