Front Power - International Harvester Company Cub Cadet 682 Operator's Manual

a feeler gauge, check the air gap. Insert a feeier gauge, check the air gap. Insert
Using Using
into one of the three access
the feeier the feeier into one of the three
gauge gauge
slots located around the outside of slots located around the outside of the brake
The air The air gap should be .010-.O15-inches gap should
plate. plate.
(.254-.381 mm), adjust
(254-.381 mm), adjust
to obtain to obtain clearance. clearance.
proper proper
ment at all three access slots. ment at all three access slots.
NOTE: if brake NOTE: if brake
plate drags plate drags
.015-inches (.254-.381 mm) air gap, increase .015-inches ( 2 5 4 - 3 8 1 mm) air gap, increase
air air to .020-inch to .020-inch
gap gap (.508 mm). (.508 mm).
if the above procedure the above
if procedure
international Harvester dealer. international Harvester dealer.
your your
CAUTION! To avoid an accident or CAUTION! To avoid an accident or
possible injury, always disengage possible Injury, always disengage
all clutches, shift t h e all clutches, shift the
into the neutral, into the neutral, depress the brake, set the depress the brake,
brake pedal lock and turn the ignition brake pedal lock and turn
"OFF" before "OFF" before working on the machine.
working
Broking
Broke
must
engaging
engaging
With With Iock
pedal pedal lock
in position as in position as
shown broke: shown brakes withstand a withstand a
must must
100 t h s .
oHOO ft.|bs.per
torque of torque
pOl'
Wear
M 5 ! ! ! M 5 1 5 1

FRONT POWER

FRONT
access
brake
the
be .010-.015-inches
the the self-locking nuts nuts
self-locking
Repeat adjust‑ Repeat adjust‑
on clutch at.010‑ on clutch at.010‑
does not does not work, see see
work,
transmission transmission
set
the
t h e ignition
on machine.
the
BRAKES BRAKES
zone.
be
wheel wheel
\
\
zone
_ .
_ " _ _ _ _ _ _ _ . .
Brake Brake
TAKE-OFF TAKE-OFF
POWER
1. Access slots 1. Access slots
2. Brake 2. Brake
3. Self-locking 3. Self-locking
I : " ‐ - ‐ ‐ _ _ ‐ _ _ . _ _ _ _ _ ‐ ‐ . . ‐ ‐ _ _ _ _ _ . _ . .
adjustments. adjustments.
24
24
M i l - 1 7 3 4 4 A MA-1 7 3 4 4 A
p l a t e plate
nuts nuts
' 0 , .
'
0