International Harvester Company Cub Cadet 682 Operator's Manual page 37

The life of The life of
lubrication is a lubrication is a
thatall
thatall
Be certain Be certain
assembled in place, using the lubrication
assembled in place, using the lubrication
illustrations as a illustrations as a
guide. guide.
lubricate the tractor lubricate the tractor
Always Always
before taking it to the field. Use a pressure before the field. Use a pressure
taking it to
lubricating gun.
lubricating gun.
Be sure all fittings Be sure all are free from dirt and are free from dirt and
fittings
so the lubricant is certain to enter the bear‑ so the lubricant is certain to enter the bear‑
ing.
ing.
Keep your supply of lubricating oil Keep your supply of lubricating oil and grease stored in clean
tainers, and covered to protect from dust and dirt. tainers, and covered to protect from dust and dirt.
Keep the lubricating gun nozzle clean Keep the lubricating gun nozzle clean and wipe dirt from grease fit‑
before before
tings tings
in the illustration indicate the in the illustration indicate the
The The symbols symbols
method method of application and the hourly intervals
of application
to to apply the the lubricant. lubricant.
apply
Use a pressure lubricating gun and Use a pressure lubricating
251 H EP 251
6 6 apply IH apply IH
lent No. lent No.
2 multi-purpose 2 multi-purpose
grease) sufficient to flush grease) sufficient to flush out the old
and dirt. Lubricate at and dirt. Lubricate at
cated cated on symbols. on symbols.
"IRRIGATION "IRRIGATION
machine depends upon the care it is machine depends upon the care it is
any any
very important part very important part
lubrication lubrication are are
fittings fittings
thoroughly thoroughly
paint paint
lubricating. lubricating.
and the intervals
hourly
and
gun
H EP grease (or equiva‑ grease (or equiva‑
lithium lithium
out
the old grease
grease
intervals indi‑ intervals indi‑
hourly
hourly
GUIDE GUIDE
of of
that care. care.
that
force the lubricant through the full force the lubricant through the full
Always Always
length of each bearing until it emerges at the length of each bearing until it emerges at the
end, end, with it the worn lubricant and with it the worn lubricant and
carrying
carrying
dirt that dirt that may have
any any may
Miscellaneous
Miscellaneous working parts working parts
with lubrication fittings should be oiled daily with lubrication
fittings should
with a good grade of lubricating oil. with a good
grade of lubricating
Lubricant is Lubricant is
cheap. cheap.
can 'be
parts can'be expensive to replace. parts expensive to replace.
and grease stored
and wipe dirt from
/ ' I
'1 Use oil can at Use oil can at
, , on symbols. on symbols.
Hand lubricate these areas at the Hand lubricate these areas at the
hourly hourly
251H EP grease or equivalent No. 2 251H EP grease or equivalent No. 2
@
lithium lithium
multi-purpose multi-purpose
34 34
given. Proper given. Proper
have entered the the
entered bearing. bearing.
not not
provided provided
be
oiled
oil.
Use Use plenty of it. Worn of it. Worn
plenty
con‑ con‑
in clean
fit‑
grease
intervals shown intervals shown
hourly hourly
intervals intervals
shown, using shown, using
grease. grease.
./
daily
IH IH