International Harvester Company Cub Cadet 682 Operator's Manual page 40

Table of Contents

Advertisement

7 - Transmission
8. Transmission
9 - Steering gear housing.
'3 I
Control Linkage
Speed
_
10
Cam plates.
Miscellaneous
"IRRIGATION EIIIIIE
‐ After Every 50 Hours of Operation
oil filter.
‐ Every
oil filter.
NOTE: After the first 50 hours
filter and replace with
AND FUEL SYSTEM".
100 hours of operation thereafter.
1 0 0 Hours
of Operation
oil filter and
Change the
{
Refer to "ENGINE AND FUEL SYSTEM".
Once a year, apply
251H
EP grease or equivalent No. 2 multi‑
using IH
purpose lithium grease.
NOTE: To locate the lubrication fitting, remove bot‑
tom
shield and
turn
right turn position.
side of the tractor frame to locate the fitting.
Once a year,
apply
{grease
or equivalent No. 2 multi‐purpose lithium
grease.
Lubricate the brake pedal shaft and linkage with
ten
eight or
drops of engine
If the tractor is
equipped with
once
a year the Lift Bar at the implement
should be lubricated. Apply several strokes of IH
251H
EP grease or equivalent No. 2 multi-purpose
lithium
grease.
37
remove the oil
only,
a new
filter. Refer
to "ENGINE
the oil filter every
Change
replace
with
a
two strokes of
the lubricator,
the front wheels to the maximum
Then reach up under the right
a light amount of IH 251H EP
oil.
a Three-Point
new filter.
Hitch,
rockshaft

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cub cadet 782

Table of Contents