International Harvester Company Cub Cadet 682 Operator's Manual page 29

FRONT WHEEL TOE-IN WHEEL TOE-IN
FRONT
The front wheel toe-in dimension is approx‑
The front wheel toe-in dimension is approx‑
1/8-inch closer in front than in the 1/8‐inch closer in front than in the
imately imately
rear. To measure for proper toe-in, make a rear. To measure for proper
chalk mark on the centerline of each tire the chalk mark on the centerline of each tire the
same same
from the from
height height the ground as the
wheel hubs. Measure the distance between wheel hubs. Measure the distance between
" A " . " A " .
the marks the marks then then
the marks are toward the rear of the tractor, the marks are toward the rear of the tractor,
same same
the the height from the ground as from
height
in front. The dimension should be in front. The dimension should be
1/8-inch larger at the rear. 1/8-inch larger at the rear.
imately imately
p ) "
Front wheel Front wheel
To adjust the toe-in To adjust the toe-in
loosen the lock nut " C " at the ball joint and loosen the lock nut " C " at the ball joint and
turn turn
tie rod ball tie rod ball
the the joint in or joint in or
FRONT WHEELS FRONT WHEELS
toe-in, make
front front
ground as the
rotate rotate so that so that
the tires the tires
were were
the ground as they they
approx‑ approx‑
adjustments. adjustments.
remove one ball remove one ball
joint, joint,
out out
as required. as required.
a
and
Tie r o d and Tie r o d
TURNING RADIUS TURNING RADIUS
The front wheels should have an The front wheels should have an
for left and left and
for right right
remove remove ball joint and loosen lock nut
sary, sary, ball joint and
" 0 " , turn the " D " , turn the
drag drag
counterclockwise as counterclockwise as
CAUTION! Be sure a l l CAUTION! Be sure all
reassembled reassembled
in p l a c e in p l a c e
26 26
drag link ball joints. drag link ball
joints.
equal angle equal angle
turns. turns.
lf adjustment is neces‑ lf adjustment is neces‑
loosen lock nut
link ball link ball clockwise or clockwise or
joint joint
required. required.
parts parts
with cotter with cotter
t i g h t t i g h t
and
and
spread. spread.
Q
are are
pins pins