Tenda FH456 User Manual page 30

If you cannot access the Internet after complete the Internet settings, you can check the connection
status, and follow the onscreen instructions to solve the problem.
If the Connection Status displays
the connection of the WAN port, and verify that the WAN port is well connected. Then refresh the
page. If the problem persists, change the Ethernet cable on the WAN port, and try again.
If the Connection Status displays
Your ISP, contact your Internet Server Provider (ISP) for help. If you are using Wireless Repeating
feature, check if the wireless base station (the router you bridge) enables PPPoE server.
If the Connection Status displays
help, contact your Internet Server Provider (ISP) for help. If you are using Wireless Repeating
feature, check if the wireless base station's (the router you bridge) DHCP server is disabled.
26
WAN Port unplugged! Please plug the Internet cable into
Get an IP Successfully, but cannot surf the Internet. Please contact
No response from the remote server. Please contact your ISP for
Specify Additional Settings
it, check