Tenda FH456 User Manual page 70

Specify Additional Settings
Reboot Router
Rebooting the Router will activate any modified settings on the Router. When the parameters you set
cannot take effect or the Router cannot be used normally, please try rebooting your Router to solve
these problems. Note that when the Router is rebooting, do not power off any relevant devices (Router,
computer, etc.).
Reset to Factory Defaults
Here you can restore this Router to factory default. Two methods are available here.
Method One: Log in to the Router's User Interface, click Administration, and click Reset.
Method Two: Press and hold the RST button on the back panel of the Router for about 8 seconds
and then release it to reset the Router to factory default settings.
66