Table of Contents
Advertisement
Keys
On/Off-
Powers on and shuts off the meter.
Mode-
Selects display mode. In normal operation, press Mode to sequentially
display compensated conductivity, salinity, total dissolved solids (TDS)
and uncompensated conductivity. In calibration mode, this key exits the
current calibration and displays the next calibration parameter.
Up/Down-
Increases or decreases the displayed value as desired
Cal-
In normal operation, changes the mode from Normal to Calibration.
Enter-
In Calibration Set-up, press this key to save the current parameter to
memory.
5
Advertisement
Table of Contents
