Advertisement
Quick Links
Advertisement
Related Manuals for Telstra GO SMART 3G
Summary of Contents for Telstra GO SMART 3G
- Page 1 TELSTRA GO SMART REPEATER - MOBILE 3G / 4G / 4GX TECHNICIAN/INSTALLER GUIDE Issue 1 11/04/2017...
- Page 2 Power Plug Note: At the time of writing, the antennas to be supplied with the TELSTRA GO SMART REPEATER - MOBILE have not yet been finalised, and they may be different to the antennas shown in this document. However, the installation procedures outlined in this document are still applicable, because these guidelines and the performance optimisation procedure are both generic and apply regardless of the antennas supplied.
-
Page 3: Installation
Installation To eliminate the risks, Telstra recommends that the TELSTRA GO SMART REPEATER - MOBILE is only installed as a permanent installation, completed by a suitably qualified professional installer. This will ensure that the best possible performance of the TELSTRA GO SMART REPEATER - MOBILE is achieved, and customer expectations are met. -
Page 4: Pre-Installation Assumptions
Download and install the software/WAVE app. Connect a USB cable in between the Coverage Unit and your computer. Note that a micro-USB port is located on the side of the TELSTRA GO SMART REPEATER - MOBILE amplifier module (next to the power plug port). - Page 5 WAVE App Start-up Screens Ensure that you are within a few metres of the TELSTRA GO SMART REPEATER - MOBILE unit and start the App. Once found, the App will start syncing data. WAVE App “DASHBOARD” Display Screen The opening screen of the App is the dashboard screen that displays several things: Errors –...
- Page 6 WCDMA850 (3G), Band 28 = LTE700 (4GX) NOTE: The TELSTRA GO SMART REPEATER - MOBILE will only amplify ONE band at a time. The band can be selected manually using this screen, but if Auto is selected then the unit will automatically switch itself and choose one band to amplify.
- Page 8 Installation – Step 3 This is a critical step in the installation of the TELSTRA GO SMART REPEATER - MOBILE, and it must not be skipped before moving on to Step 4 (permanent installation). To ensure that the TELSTRA GO SMART REPEATER - MOBILE is working properly (ie. achieves either the best possible...
- Page 9 TELSTRA GO SMART REPEATER - MOBILE performance can be assessed, before proceeding with the permanent installation. As a suggested guide, the relationship between the performance of the TELSTRA GO SMART REPEATER - MOBILE and the reported boost value is: BOOST 6 –...
- Page 10 Telstra takes no responsibility for any adverse effects to the vehicle or its occupants if customers choose to install the TELSTRA GO SMART REPEATER - MOBILE by themselves, or if the installation is not completed by a suitably...