Advertisement
Installation
To eliminate the risks, Telstra recommends that the TELSTRA GO SMART REPEATER - MOBILE is only installed as a
permanent installation, completed by a suitably qualified professional installer. This will ensure that the best
possible performance of the TELSTRA GO SMART REPEATER - MOBILE is achieved, and customer expectations are
met.
Telstra takes no responsibility for any adverse effects to the vehicle or its occupants if customers choose to install
the TELSTRA GO SMART REPEATER - MOBILE by themselves, or if the installation is not completed by a suitably
qualified technician/installer.
Recommended Installer Qualifications
Telstra recommends that only appropriately qualified technicians/installers complete the installation of the TELSTRA
GO SMART REPEATER - MOBILE to ensure that:
-
The safety of vehicle occupants is maintained.
-
The best performance of the TELSTRA GO SMART REPEATER - MOBILE is achieved.
-
The existing vehicle safety equipment is not compromised (such as airbags, seat belt tensioners, sensors,
controls etc)
-
Correct power connections are made to the existing vehicle electrical power system.
-
The vehicle finish/trim is not damaged during installation, or over the life of the installation.
Acceptable installer qualifications may include (but are not limited to):
-
Auto Electricians (with at least Certificate II in Automotive Electrical Technology qualifications)
-
Professional Car radio/entertainment installers
-
Professional RF Communication installers (for example, members of Australian Radio Communications
Industry Association)
In all cases, installers must also have read and understood this document, to ensure that they understand how to
optimise the TELSTRA GO SMART REPEATER - MOBILE for best performance.
Advertisement
