Telstra GO G31 Quick Start Manual

3G Closure:
Check if your Telstra
GO Repeater is con gured
to boost 4G signal
Telstra GO Repeaters
(GO G31, GO G41, GO ROAM
R41) operate on both 3G
and 4G and will not be
impacted when 3G closes
on 31 August 2024.
However, in some instances they may have
been con gured to only operate on 3G.
We encourage you to check your GO
Repeater settings, using a smartphone with
the Cel-Fi WAVE app installed to see if its
correctly con gured to boost 4G signals.
Instructions to check your GO Repeater settings:
1
Download the Cel-Fi WAVE app
available from the Google Play
Store or Apple App Store on your
smartphone.
Telstra GO (G31)
Repeater
Telstra GO G41
Stationary Repeater
Telstra GO ROAM R41
Mobile Repeater
2
Open the WAVE app on your smartphone and
ensure you are in close proximity to your GO
Repeater to allow it to connect through
bluetooth.
Follow instructions to:
• Check your GO Repeater in the Cel-Fi
WAVE app using a smartphone.
• Tap on Settings > Band Settings > Under
Technology, select 4G if it isnt already
selected.
Congratulations your GO Repeater will
3
now be con gured to boost 4G signals.