Telstra GO Series Manual

3G Closure:
Check if your Telstra
GO Repeater is configured
to boost 4G signal
Telstra GO Repeaters
(GO G31, GO G41, GO ROAM
R41) operate on both 3G˜
and 4G and will not be
impacted when 3G˜closes
from 28 October 2024.˜
However, in some instances they may have˜
been configured to only operate on 3G.˜
We encourage you to check your GO
Repeater settings, using a smartphone with
the Cel-Fi WAVE app installed to see if its
correctly configured to boost 4G signals.
Instructions to check your GO Repeater settings can boost 4G signals:
1
Download the Cel-Fi
WAVE app available from
the Google Play Store or
Apple App Store on your
smartphone.
2
Open the WAVE app on your
smartphone and ensure you are in close
proximity to your GO Repeater to allow
it to connect through Bluetooth.˜
Follow instructions to:˜
• Check your GO Repeater in the
Cel-Fi WAVE app using a
smartphone.
• Tap on Settings > Band/Channel
Settings > expand the 4G selection
and ensure that each Band is toggled
on (indicated as blue).
Congratulations your GO
3
Repeater will now be
configured to boost 4G signals.
Telstra GO (G31)
Repeater
Telstra GO G41
Stationary Repeater
Telstra GO ROAM R41
Mobile Repeater