Advertisement
1
This is how the
machine should look
when you enter the
room.
4
Fill solution tank with
water (do not exceed
130°F). Add appropriate
cleaning chemical.
7
Inspect brush or pad.
10
Turn on machine. Verify
there is enough battery
power to complete job.
Focus II Mid-Size How To
Prepare for use
2
Unplug battery charger.
Wrap cord accordingly.
5
Add clean water to
tank. Lift lid and add
detergent cartridge. Do
not mix detergent in the
tank (machines with chemical
mixing system only).
8
Install brush or pad-
holder under the deck.
11
Use yellow palm
switches to move
forward and white
button for reverse.
Adjust speed of
machine as needed.
3
Inspect recovery tank,
empty debris catch
cage then lower the lid.
6
Inspect squeegee
blade, install squeegee
on machine and attach
recovery hose to the
squeegee inlet.
9
Install brush for
Cylindrical models.
12
Review operator
controls. Prepare
use.
for
Advertisement
Table of Contents
Related Manuals for Nilfisk-Advance Focus II Mid-Size
Summary of Contents for Nilfisk-Advance Focus II Mid-Size
- Page 1 Focus II Mid-Size How To Prepare for use This is how the Inspect recovery tank, machine should look Unplug battery charger. empty debris catch when you enter the Wrap cord accordingly. cage then lower the lid. room. Inspect squeegee...
- Page 2 Focus II Mid-Size How To Scrubbing Adjust speed if needed. Release palm switches Lower squeegee. While in motion, press to pause. Press reverse the one touch scrub button for backward button then adjust the motion. Press one solution flow rate.
- Page 3 Focus II Mid-Size How To Storing the Machine & Daily Maintenance Remove, inspect and rinse cylindrical brush. Empty debris hopper. Empty recovery tank Charge batteries and and solution tank. Remove, inspect and wipe down exterior. Empty water in suitable rinse squeegee blades.
Need help?
Do you have a question about the Focus II Mid-Size and is the answer not in the manual?
Questions and answers