Weight Of The Furniture Door; Fitting Large Or Divided Furniture Doors - Miele KFN 37232 iD Operating And Installation Instructions

Installation
Appliance Gap X [mm] for different
furniture
door thick-
ness
A [mm]
R0
≥16 - 19
20 5
21 5.5
22 6.5
Adjoining kitchen furniture front
A = Furniture front thickness
B = Edge radius
X = Gap
Adjoining side wall
A = Furniture front thickness
B = Edge radius
X = Gap
Tip: Fit a spacer between the housing
unit carcase and the side wall. This way
you will get a sufficiently wide gap.
58
edge radii B
R1.2 R2 R3
Min. 3
4 4 3.5
5 4.5 4
6 5.5 5

Weight of the furniture door

Fitting a door front which is heavier
than the maximum permitted could
damage the hinges. This can cause
subsequent functional problems.
Before fitting furniture doors, ensure
that the weight of the door does not ex-
ceed the maximum permitted:
Appliance
KFN 37232 iD
Fitting large or divided furniture
doors
When fitting large or divided furniture
doors an extra fitting kit or set of fixing
brackets should be used. These are
available to order from Miele.
Upper Lower
door in door in
kg kg
17 12