Miele KFN 37232 iD Operating And Installation Instructions page 70

Installing the appliance
Installing the appliance
If the appliance is pushed too far into
the niche, the doors may not close
properly once the furniture doors
have been fitted. This can cause ice
to build up, condensate to accumu-
late and lead to faults in the appli-
ance. These can all lead to increased
energy consumption.
Push the appliance into the building-
in niche making sure a gap of 42 mm
is maintained all round between the
appliance carcase and the front of
the housing unit side walls.
70
 Push the appliance into the niche un-
til all fixing brackets at the top and
bottom are in line with the front edge
of the housing unit side wall.
This will create a gap all round of 42
mm to the front edges of the housing
unit side walls.
–  With 16 mm thick walls:
The spacers should touch the front
edge of the housing unit side walls at
the top and bottom.
–  With 19 mm thick walls:
The front edges of the top and bot-
tom hinges should be flush with the
front edge of the housing side wall.