Installation; Location; Climate Range - Miele KFN 37232 iD Operating And Installation Instructions

This appliance must be built in, oth-
erwise it could tip up.

Fire risk and danger of damage!
This refrigerator must not be installed
underneath a hob.

Location

This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your ap-
pliance please bear in mind that it will
use more energy if installed near to a
heater, a cooker or other appliance that
gives off heat. Direct sunlight should
also be avoided.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption is.
When installing the appliance, please
note:
– The socket must be easily accessible
in an emergency, not concealed be-
hind the appliance.
– The plug and cable must not touch
the rear of the appliance as they
could be damaged by vibrations from
the appliance.
– Do not plug in other appliances be-
hind this appliance.

In environments with high hu-
midity condensation can build up on
the external appliance panels.
Condensate can cause corrosion on
external appliance panels.
For prevention, it is advisable to in-
stall the appliance where there is suf-
ficient ventilation in a dry and/or air
conditioned room.
After installation please ensure that
the appliance doors close properly,
the ventilation gaps are not covered
and that the appliance has been in-
stalled in accordance with these in-
stallation instructions.

Climate range

The appliance is designed for use within
a certain climate range (ambient tem-
peratures) and should not be used out-
side this range. The climate range of the
appliance is stated on the data plate in-
side the appliance.
Climate range
SN
N
ST
T
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal tem-
perature in the appliance to rise with the
risk of food deteriorating and going off.

Installation

Ambient room
temperature
+10 to +32 °C
+16 to +32 °C
+16 to +38 °C
+16 to +43 °C
55