Weight Of The Furniture Door; Fitting Large Or Segmented Furniture Doors; Before Installing The Appliance - Miele K 35422 iD Operating And Installation Instructions

Weight of the furniture door


If the door panel is too heavy,
this can cause damage!
Fitting a furniture door panel which is
heavier than the maximum permitted
weight could damage the hinges.
This can cause subsequent
functional problems.
Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum weight permitted:
Appliance
K 35422 iD
K 37422 iD
Fitting large or segmented furniture
doors
A mounting kit or another pair of fixing
brackets can be ordered from Miele.
Maximum weight
of furniture door in
kg
21
26
Installation advice

Before installing the appliance

 Take the accessory pack which
includes installation parts and other
accessories out of the appliance and
remove the packaging strap holding
the door in place.
 Do not remove the following from
the rear of the appliance:
– The spacers (depending on
model).These ensure that the gap
required between the back of the
appliance and the wall is maintained.
– The bags (depending on model)
located inside the metal grille (heat
exchanger).
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and not
dangerous.
 Remove any cable clips from the
back of the appliance.
 Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
63