Chapter 3- Loading The Thermal Paper Into The Terminal - VeriFone Vx 570 Training Manual

Chapter 3- Loading the Thermal Paper into the Terminal

1.
If the green light blinks on and off on the right side of the display, it indicates that the printer
is out of paper.
2.
The printer cover release is on the right side of the Terminal (see Figure 5). Open the printer
cover by pushing down on the printer cover release.
Figure 5 - Terminal Side View
3.
Loosen the end of the new roll of paper and drop it into the printer tray with the loose paper
end towards the front of the terminal (See Figure 6).
Printer Tray
4.
Gently close the cover until it clicks shut. The green light should now stay illuminated. Allow
a small amount of paper to extend outside the cover. The terminal window should now
display (the v0.0.0 will show a real version number and the XXXX will have a number
reflecting the number of documents loaded in the document printer):
v0.0.0
XXXX Enter Passcode
(current date & time)
(online)/(dialup)/error
VeriFone Vx 570 Training Manual
1/27/2012
Figure 6 - Terminal Front View
Printer Cover
Release
Printer Cover
Green Indicator LED
6