2-2. Connectivity Settings - Toyota RAV4 2019 Owner's Manual

42

2-2. Connectivity settings

● Depending on the type of Blue-
®
tooth device being connected, it
may be necessary to perform
additional steps on the device.
● When disconnecting a Bluetooth
device, it is recommended to dis-
connect using the system.
Connecting a Bluetooth
■
device in a different way
(from phone top screen)
P.174
Connecting a Bluetooth
■
device in a different way
(from phone setup screen)
P.188
Connecting a Bluetooth
■
device in a different way
(from Bluetooth
screen)
P.139
Auto connection mode
■
To turn auto connection mode
on, set "Bluetooth Power" to on.
(P.45) Leave the Bluetooth
device in a location where the
connection can be established.
 When the engine switch
<power switch> is in ACC or
ON, the system searches for
a nearby registered device.
 The system will connect with
the registered device that was
last connected, if it is nearby.
When automatic connection
priority is set to on and there
is more than one registered
®
®
®
®
®
audio
®
®
Bluetooth phone available,
the system will automatically
connect to the Bluetooth
phone with the highest prior-
ity. (P.45)
Connecting manually
■
When the auto connection has
failed or "Bluetooth Power" is
turned off, it is necessary to con-
nect the Bluetooth
ually.
1
Display the Bluetooth
tings screen. (P.40)
2
Follow the steps in "Connect-
ing a Bluetooth
step 2. (P.41)
Reconnecting the Blue-
■
®
tooth phone
®
If a Bluetooth phone is discon-
nected due to poor reception
from the Bluetooth
when the engine switch <power
switch> is in ACC or ON, the
system automatically recon-
nects the Bluetooth
Registering a Bluetooth
device
Up to 5 Bluetooth
be registered.
®
Bluetooth compatible phones
(HFP) and audio players (AVP)
can be registered simultane-
ously.
®
®
device man-
®
set-
®
device" from
®
network
®
phone.
®
®
devices can