Toyota RAV4 2019 Owner's Manual page 192

192
7-2. Setup
the phone.
Updating the contacts in a
■
different way (from the call
history screen)
1
Display the phone top
screen. (P.172)
2
Select "History" and select a
contact not yet registered in
the contact list.
3
Select "Update Contact".
4
Select the desired contact.
5
Select a phone type for the
phone number.
*
: For PBAP compatible Bluetooth
phones, this function is available
when "Automatic Transfer" is set
to off. (P.191)
Transfer contacts from
device
From phone (OPP compati-
ble Bluetooth
When the contact is not regis-

tered
1
Select "Transfer Contacts
from Device".
2
Select "From Phone (Blue-
tooth)".
3
Transfer the contact data to
the system using a Blue-
®
tooth phone.
 This operation may be unnec-
essary depending on the type
of Bluetooth
*
®
phones only)
®
phone.
 To cancel this function, select
"Cancel".
4
Check that a confirmation
screen is displayed when the
operation is complete.
When the contact is regis-

tered
1
Select "Transfer Contacts
from Device".
2
Select "From Phone (Blue-
tooth)".
3
Select "Replace Contacts" or
"Add Contact".
"Replace Contacts": Select to trans-
®
fer the contact from the connected
cellular phone and replace the cur-
rent one.
"Add Contact": Select to transfer
the desired contact data from the
connected cellular phone to add to
the current one.
4
Transfer the contact data to
the system using a Blue-
®
tooth phone.
 This operation may be unnec-
essary depending on the type
of Bluetooth
 To cancel this function, select
"Cancel".
5
Check that a confirmation
screen is displayed when the
operation is complete.
From USB device
Backed-up contact data
("vCard" formatted) can be
transferred from USB device or
®
phone.