Receiving A Call Using The Bluetooth Hands-Free Sys- Tem; Incoming Calls - Toyota RAV4 2019 Owner's Manual

180
7-1. Phone operation (Hands-free system for cellular phones)
®
tooth phone being connected, it
may be necessary to perform
additional steps on the phone.
By home screen
1
Display the home screen.
(P.29)
2
Select the desired contact.
3
Check that the dialing screen
is displayed.
Registering a new contact
■
1
Select and hold the screen
button to add a contact.
2
Select the desired contact.
3
Select the desired number.
If there is no contact in the con-
●
tacts list, the contacts cannot be
registered at the home screen.
● The contact cannot be registered
at the home screen while driving.
Receiving a call using
the Bluetooth
free system
When a call is received, the
following screen is dis-
played with a sound.

Incoming calls

1
Select "Answer" or press the
switch on the steering
wheel to talk on the phone.
"Decline": Select to refuse to
receive the call.
To adjust the volume of a received
call: Turn the "POWER VOLUME"
knob, or use the volume control
switch on the steering wheel.
The contact image picture can be
●
displayed only when the vehicle is
not moving.
● During international phone calls,
the other party's name or number
may not be displayed correctly
depending on the type of Blue-
®
tooth phone you have.
● The incoming call display mode
can be set. (P.189)
● The ringtone that has been set in
the sound settings screen can be
heard when there is an incoming
call. Depending on the type of
®
hands-