Table of Contents
Advertisement
Available languages
Available languages
Bodypack transmitter
The bodypack transmitter can be used for wireless transmission of audio signals to a receiver module which
is tuned to the same transmission channel. Headset and lavalier microphones are available as accessories.
No.
Element
1
Microphone input
2
On/off switch
3
Battery indicator
4
Display
5
Gain control
6
Transmission power
selector
7
Buttons to set the
transmission channel
8
Battery compartment
1
2
3
Function
3-pin mini XLR jack for connecting one of the optional microphones.
If the indicator lights up red, the batteries are discharged.
Indicates the transmission channel and the battery capacity:
To correct the volume level of the bodypack transmitter. Reduce the
sensitivity if the volume of the transmitter signal is too high and thus
distorted. Increase the sensitivity if the volume is too low and a poor S/N
ratio results.
HI = high power for a long range, yet reduced battery life, LO = reduced
range for a long battery life.
Press either button to set the channel; then the display will be flashing for
5 seconds.
Fold up the cover and insert two 1.5 V AA batteries as indicated in the
compartment and replace the cover.
Note: If the bodypack transmitter is not used for a longer period, remove
the batteries to prevent damage in case of battery leakage.
5
6
35 • EN
4
7
8
Advertisement
Chapters
Table of Contents
