4.4 Transmitter module ALT-105
■
LCD screen
Indicates
the
transmission
frequency.
■
Transmitting LED TX
Lights up when the transmitting unit is switched on.
■
Level LEDs AF
Indicate the input level of the transmitting unit.
■
SET button
To activate the adjusting mode for the transmission
channel and to confirm.
4.5 Echo module EM-105
■
Echo control
Turn the control clockwise to turn on the echo effect and
to adjust the volume for the echo module.
■
Repeat control
Adjusts the number of repeats of the internal echo effect.
■
Delay control
Adjusts the delay time of the internal echo effect.
.
channel
or
the
radio
38/56
■
▲/▼ buttons
To adjust the frequency. To indicate the frequency
instead of the channel on the display keep one of these
buttons pressed.
■
On/Off/Volume control
In position OFF, the transmitter is switched off. Turn the
control clockwise to switch on the transmitter and to
adjust
the
desired
volume
transmitted.
■
MIC controls 1/2
To adjust the signal part for the microphones.
■
Microphone inputs MIC 1/MIC 2
6.3 mm jacks for connecting microphones.
■
Charge Indicator
See chapter 4.7.
■
Power On/Off
See chapter 4.7.
00031461.DOC, Version 1.1
for
the
audio
signal