Table of Contents
Advertisement
+
Manual MSX
+
15 G-MSX
V3.0 Adapter Board
The MSX+ power stage can be directly plugged on the G-MSX+ adapter board.
The G-MSX+ adapter board contains the connectors for the motor cable (ST3), the signal
lead (S2, ST2, VG1) and the supply voltage (+UB, GND).
The open-collector control signals are connected to the S2 or ST2 connector, the
ServiceBus to ST1. "Basic position" or „auxiliary voltage" are activated by the J1 jumper,
the +5/24 V
opto-coupler supply by J2 jumper.
DC
+
G-MSX
top side connections
10 pin connector S2 (connection to the SLS) (male)
MA 2128-A004 EN
60
Advertisement
Table of Contents
