+
Manual MSX
3.2 Directives and Standards
CE Mark
EC Machine Directive
EC EMC Directive
Standards for safe
operation
Standards for
observing the EMC
limit values
Standards for
measuring methods
of observing EMC
limit values
MA 2128-A004 EN
With the declaration of conformity and the CE Mark on the
product, the manufacturer certifies that the product complies
with the requirements of the relevant EC directives. The unit,
described here, can be used anywhere in the world.
The drive system, described here, isn´t a machine in the
sense of the EC machine directive (2006/42/EC), but a
component of a machine for installation. They have no
functional moving parts. However, they can be part of a
machine or equipment. The conformity of the complete
system in accordance with the machine guideline is to be
certified by the manufacturer with the CE marking.
The EC Directives on electromagnetic compatibility
(2014/30/EU) applies to products, which can cause
electromagnetic interference or whose operation can be
impaired by such interference.
The power stage's compliance with the EMC Directive cannot
be assessed until it has been installed into a machine or
installation. The instructions provided in "Installation" must be
complied with to guarantee that the power stage is EMC
compliant when fitted in the machine or installation and
before use of the device is permitted.
EN 60204-1: 2007-6: Electrical equipment of machines,
EN 60529: 2014-09: IP Degree of protection
EN 61000-3-2: EMC
EN 61000-6-1,3,4: Emission standard
EN 61000-6-2:2005: EMC Immunity for industrial
EN 55011 class B: Noise field and voltage measuring
EN 61000-4-2...6,11 Emission standard test
12
degree of pollution 2 must be
observed
environments