4.1 Overview
This chapter describes the procedures for disassembling and assembling the main components
of the EMP-822/EMP-83/EMP-X5/EMP-S5 projector. Unless otherwise specified, reassembly
is the reverse of the disassembly procedure. Read the precautions described in the next section
before starting.
4.1.1 Precautions
Some procedures require specific precautions that must be followed, and those will be noted
throughout this chapter. Note the following precaution definitions:
WARNING
Procedures which, if not strictly observed, could result in personal injury are
W A R N I N G
described under the heading WARNING
CAUTION
CAUTION signals a precaution which, if ignored, could result in damage to
equipment.
REASSEMBLY
If assembly needs special attention or the procedure is different from the reversed
disassembly procedure, the correct procedure is described under the heading
REASSEMBLY.
CHECK POINT
Important tips for procedures are described under the heading CHECK POINT.
C H E C K
P O I N T
SEIKO EPSON
EMP-822/EMP-83/EMP-X5/EMP-S5
4-2
Revision:A